| Colour TV |
1 No. |
Wire Wound Resistors |
2 Nos |
| Colour TV |
1 No. |
Metal Film Resistors |
37 Nos |
| Colour TV |
1 No. |
Carbon Film Resistors |
113 Nos |
| Colour TV |
1 No. |
Thermistor |
1 Nos |
| Colour TV |
1 No. |
Small Signal Transistor |
1400 Nos |
| Colour TV |
1 No. |
Zener Diodes |
5 Nos |
| Colour TV |
1 No. |
Plastic Film Capacitors |
22 Nos |
| Colour TV |
1 No. |
Aluminium Electrolytic Capacitors |
51 Nos |
| Colour TV |
1 No. |
Ceramic Disc Capacitors |
74 Nos |
| Colour TV |
1 No. |
Crystals |
1 Nos |
| Colour TV |
1 No. |
Power TR |
3 Nos |
| Colour TV |
1 No. |
Loud Speaker |
Upto 6 Nos. on net to net basis with accountability clause |
| Colour TV |
1 No. |
Hard Ferrite |
170 Nos. |
| Colour TV |
1 No. |
Soft Ferrite |
275 gms. |
| Colour TV |
1 No. |
Single Side PCB |
930 sq. cm |
| Colour TV |
1 No. |
Picture tubes |
1 Nos |
| Colour TV |
1 No. |
ICs |
300 Nos |
| Colour TV |
1 No. |
HIPS (High Impact Polystyrene) |
1.05 Kgs/Kg content in the export product. |
| Colour TV |
1 No. |
Remote Control |
1 No. |
| Colour TV |
1 No. |
Mains Cord |
1 No. (Length 1 to 1.5 meters) |
| Colour TV |
1 No. |
Coils |
17 Nos. |
| Colour TV |
1 No. |
Connector |
5 Nos |
| Colour TV |
1 No. |
CRT Socket |
1 No. |
| Colour TV |
1 No. |
DY Connector |
2 Nos |
| Colour TV |
1 No. |
Eyelet |
27 Nos |
| Colour TV |
1 No. |
Flyback & SMPS Transformer |
2 Nos |
| Colour TV |
1 No. |
Fuse |
1 No. |
| Colour TV |
1 No. |
Fuse Holder |
2 Nos |
| Colour TV |
1 No. |
Headphone Jack |
1 No. |
| Colour TV |
1 No. |
Heat Sink |
5 Nos. |
| Colour TV |
1 No. |
LED Holder |
1 No. |
| Colour TV |
1 No. |
Line Filter |
2 Nos |
| Colour TV |
1 No. |
Power Switch |
1 No. |
| Colour TV |
1 No. |
Saw Filter |
1 No. |
| Colour TV |
1 No. |
Scart Socket |
1 No |
| Colour TV |
1 No. |
Sockets |
5 Nos |
| Colour TV |
1 No. |
Tact/Push Switches |
6 Nos |
| Colour TV |
1 No. |
Tuner |
1 No. |
| Colour TV |
1 No. |
Degaussing Coil |
1 No. |
| Colour TV |
1 No. |
PACKING MATERIAL |
|
| Colour TV |
1 No. |
Paper Kraft |
As per Policy for Packing materials |
| Colour TV |
1 No. |
EPS (Expanded Polystyrene) |
As per Policy for Packing materials |
| Ink Blue Concentrate (Acid Blue 93) (C.I. No. 42780) |
1 kg |
Aniline |
2.212 kg |
| Ink Blue Concentrate (Acid Blue 93) (C.I. No. 42780) |
1 kg |
Monochloro Benzene |
0.282 kg |
| Ink Blue Concentrate (Acid Blue 93) (C.I. No. 42780) |
1 kg |
Caustic Soda Lye/ Flakes (100%) |
1.136 kg |
| Liquid Printing Ink mediums For Flexographic & Gravure process |
1 Kg |
Synthetic Resins (Polyamide, VAGH & VMCH (Vinyl Acetate - Vinyl Chloride/ Co-polymer, Acrylic Emulsion,Polyester, and Polyurethane Resin) |
0.227 Kg. |
| Liquid Printing Ink mediums For Flexographic & Gravure process |
1 Kg |
Relevant Solvent (Methyl Isobutyl Ketone, Iso propyl Alcohol, N-Propanol, N-Butanol, Butyl Acetate Toluene) |
0.721 Kg. |
| Liquid Printing Ink mediums For Flexographic & Gravure process |
1 Kg |
Additives (Titanium Chilates, Wax, Aerosil, PVP Luviscol, silaneamine, Acetyl Acetone, Isopropyl Titanate) |
0.052 Kg. |
| Liquid Printing Inks for Flexographic & Gravure Process in white colour |
1 Kg |
Titanium Dioxide |
0.389 Kg. |
| Liquid Printing Inks for Flexographic & Gravure Process in white colour |
1 Kg |
Synthetic Resins (Polyamide, VAGH & VMCH (Vinyl Acetate - Vinyl Chloride/ Co-polymer, Acrylic Emulsion,Polyester, and Polyurethane Resin) |
0.241 Kg. |
| Liquid Printing Inks for Flexographic & Gravure Process in white colour |
1 Kg |
Relevant Solvent (Methyl Isobutyl Ketone, Iso propyl Alcohol, N-Propanol, N-Butanol, Butyl Acetate Toluene) |
0.315 Kg. |
| Liquid Printing Inks for Flexographic & Gravure Process in white colour |
1 Kg |
Additives (Titanium Chilates, Wax, Aerosil, PVP Luviscol, silaneamine, Acetyl Acetone, Isopropyl Titanate) |
0.056 Kg. |
| Liquid Printing Inks for Flexographic & Gravure process in varous colours |
1 Kg |
Organic pigments/metal complex dyes |
0.101 Kg. |
| Liquid Printing Inks for Flexographic & Gravure process in varous colours |
1 Kg |
Synthetic Resins (Polyamide, VAGH & VMCH (Vinyl Acetate - Vinyl Chloride/ Co-polymer, Acrylic Emulsion,Polyester, and Polyurethane Resin) |
0.238 Kg. |
| Liquid Printing Inks for Flexographic & Gravure process in varous colours |
1 Kg |
Relevant Solvent (Methyl Isobutyl Ketone, Iso propyl Alcohol, N-Propanol, N-Butanol, Butyl Acetate Toluene) |
0.608 Kg. |
| Liquid Printing Inks for Flexographic & Gravure process in varous colours |
1 Kg |
Additives (Titanium Chilates, Wax, Aerosil, PVP Luviscol, silaneamine, Acetyl Acetone, Isopropyl Titanate) |
0.053 Kg. |
| Liquid Printing Inks for Flexographic & Gravure process in Black colour |
1 Kg |
Carbon Black |
0.103 Kg. |
| Liquid Printing Inks for Flexographic & Gravure process in Black colour |
1 Kg |
Synthetic Resins (Polyamide, VAGH & VMCH (Vinyl Acetate - Vinyl Chloride/ Co-polymer, Acrylic Emulsion,Polyester, and Polyurethane Resin) |
0.359 Kg. |
| Liquid Printing Inks for Flexographic & Gravure process in Black colour |
1 Kg |
Relevant Solvent (Methyl Isobutyl Ketone, Iso propyl Alcohol, N-Propanol, N-Butanol, Butyl Acetate Toluene) |
0.487 Kg. |
| Liquid Printing Inks for Flexographic & Gravure process in Black colour |
1 Kg |
Additives (Titanium Chilates, Wax, Aerosil, PVP Luviscol, silaneamine, Acetyl Acetone, Isopropyl Titanate) |
0.051 Kg. |
| Printing Ink Black containing 25.4% Pigment and 28.3% Solid Resin |
1 Kg |
Organic Pigments |
0.072 Kg |
| Printing Ink Black containing 25.4% Pigment and 28.3% Solid Resin |
1 Kg |
Phenolic Resin |
0.184 Kg |
| Printing Ink Black containing 25.4% Pigment and 28.3% Solid Resin |
1 Kg |
Hydro Carbon Resin |
0.094 Kg |
| Printing Ink Black containing 25.4% Pigment and 28.3% Solid Resin |
1 Kg |
Pigment Extender |
0.005 Kg |
| Printing Ink Black containing 25.4% Pigment and 28.3% Solid Resin |
1 Kg |
Collodial Fumed Silica |
0.005 Kg |
| Printing Ink Black containing 25.4% Pigment and 28.3% Solid Resin |
1 Kg |
Tung Oil |
0.020 Kg |
| Printing Ink Black containing 25.4% Pigment and 28.3% Solid Resin |
1 Kg |
Carbon Black |
0.190 Kg |
| Printing Ink Cyan containing 15.6% Pigment and 37.8% Solid Resin |
1 Kg |
Organic Pigments |
0.160 Kg |
| Printing Ink Cyan containing 15.6% Pigment and 37.8% Solid Resin |
1 Kg |
Phenolic Resin |
0.20 Kg |
| Printing Ink Cyan containing 15.6% Pigment and 37.8% Solid Resin |
1 Kg |
Hydro Carbon Resin |
0.072 Kg |
| Printing Ink Cyan containing 15.6% Pigment and 37.8% Solid Resin |
1 Kg |
Pigment Extender |
0.004 Kg |
| Printing Ink Cyan containing 15.6% Pigment and 37.8% Solid Resin |
1 Kg |
Collodial Fumed Silica |
0.019 Kg |
| Printing Ink Cyan containing 15.6% Pigment and 37.8% Solid Resin |
1 Kg |
Tung Oil |
0.125 Kg |
| Printing Ink Magenta containing 15.6% Pigment and 39.7% Solid Resin |
1 Kg |
Organic Pigments |
0.160 Kg |
| Printing Ink Magenta containing 15.6% Pigment and 39.7% Solid Resin |
1 Kg |
Phenolic Resin |
0.194 Kg |
| Printing Ink Magenta containing 15.6% Pigment and 39.7% Solid Resin |
1 Kg |
Hydro Carbon Resin |
0.098 Kg |
| Printing Ink Magenta containing 15.6% Pigment and 39.7% Solid Resin |
1 Kg |
Pigment Extender |
0.004 Kg |
| Printing Ink Magenta containing 15.6% Pigment and 39.7% Solid Resin |
1 Kg |
Collodial Fumed Silica |
0.019 Kg |
| Printing Ink Magenta containing 15.6% Pigment and 39.7% Solid Resin |
1 Kg |
Tung Oil |
0.125 Kg |
| Printing Ink Yellow containing 12.76% Pigment and 38.7% Solid Resin |
1 Kg |
Organic Pigments |
0.130 Kg |
| Printing Ink Yellow containing 12.76% Pigment and 38.7% Solid Resin |
1 Kg |
Phenolic Resin |
0.194 Kg |
| Printing Ink Yellow containing 12.76% Pigment and 38.7% Solid Resin |
1 Kg |
Hydro Carbon Resin |
0.098 Kg |
| Printing Ink Yellow containing 12.76% Pigment and 38.7% Solid Resin |
1 Kg |
Pigment Extender |
0.004 Kg |
| Printing Ink Yellow containing 12.76% Pigment and 38.7% Solid Resin |
1 Kg |
Collodial Fumed Silica |
0.020 Kg |
| Printing Ink Yellow containing 12.76% Pigment and 38.7% Solid Resin |
1 Kg |
Tung Oil |
0.125 Kg |
| Printing Ink in various colours other than black with organic pigment content 14+/-2% |
1 kg |
Organic Pigment |
0.14 kg |
| Printing Ink in various colours other than black with organic pigment content 14+/-2% |
1 kg |
Phenolic Resin |
0.194 kg |
| Printing Ink in various colours other than black with organic pigment content 14+/-2% |
1 kg |
Hydrocarbon Resin |
0.072 kg |
| Printing Ink in various colours other than black with organic pigment content 14+/-2% |
1 kg |
Pigment Extender |
0.004 kg |
| Printing Ink in various colours other than black with organic pigment content 14+/-2% |
1 kg |
Colloidal Fumed Silica |
0.019 kg |
| Printing Ink in various colours other than black with organic pigment content 14+/-2% |
1 kg |
Tung Oil |
0.125 kg |
| Printing Ink Vehicle - Gel (Solid content 59 +/- 1%) (Linseed Oil base OR Soyabean Oil Base) |
1 kg |
Relevant Alkyd Resin namely Soya Long Oil Length Alkyd Resin having Solid content 100% / Linseed Oil based Alkyd Resin (Long Oil Length) having Solid content 100% |
0.1050 kg |
| Printing Ink Vehicle - Gel (Solid content 59 +/- 1%) (Linseed Oil base OR Soyabean Oil Base) |
1 kg |
Relevant Oil namely Refined Linseed Oil/ Soyabean Oil |
0.0200 kg |
| Printing Ink Vehicle - Gel (Solid content 59 +/- 1%) (Linseed Oil base OR Soyabean Oil Base) |
1 kg |
Texanol Isobutyrate |
0.0520 kg |
| Printing Ink Vehicle - Gel (Solid content 59 +/- 1%) (Linseed Oil base OR Soyabean Oil Base) |
1 kg |
Petroleum Distillate (Distillation Range 240-330 Degree Celsius) |
0.3600 kg |
| Printing Ink Vehicle - Gel (Solid content 59 +/- 1%) (Linseed Oil base OR Soyabean Oil Base) |
1 kg |
Phenol Modified Rosin Ester/Rosin modified phenolic Resin (Technical Specification Acid values 25 max. softening point (R & B) 110 Degree - 120 Celsius) |
0.4600 kg |
| Printing Ink Vehicle - Gel (Solid content 59 +/- 1%) (Linseed Oil base OR Soyabean Oil Base) |
1 kg |
Antioxidant namely BHT and MEHQ |
0.0100 kg |
| Liquid Printing Ink - P.U. Based - in Black Colour - (For Food Grade Packaging ) Pigment content - Minimum 10.5% Solid P.U. Resin content - Minimum 11.4% |
1 MT |
Relevant Solvents, namely, Toluene, Iso Propyl Alcohol, Methyl Ethyl Ketone |
719.30 kgs |
| Liquid Printing Ink - P.U. Based - in Black Colour - (For Food Grade Packaging ) Pigment content - Minimum 10.5% Solid P.U. Resin content - Minimum 11.4% |
1 MT |
Polyol |
86.26 kgs |
| Liquid Printing Ink - P.U. Based - in Black Colour - (For Food Grade Packaging ) Pigment content - Minimum 10.5% Solid P.U. Resin content - Minimum 11.4% |
1 MT |
Di-Isocyanate |
18.80 kgs |
| Liquid Printing Ink - P.U. Based - in Black Colour - (For Food Grade Packaging ) Pigment content - Minimum 10.5% Solid P.U. Resin content - Minimum 11.4% |
1 MT |
Ink Additives |
84.06 kgs |
| Liquid Printing Ink - P.U. Based - in Black Colour - (For Food Grade Packaging ) Pigment content - Minimum 10.5% Solid P.U. Resin content - Minimum 11.4% |
1 MT |
Pigment Carbon Black |
105.00 kgs. |
| Liquid printing Ink -P.U. Based - in White colour - (For Food Grade Packaging) Pigment content - Minimum 27.8% Solid P.U. Resin content - Minimum 9.6% |
1 MT |
Relevant Solvents, namely, Toluene, Iso Propyl Alcohol, Methyl Ethyl Ketone, Ethyl Acetate |
619.30 kgs |
| Liquid printing Ink -P.U. Based - in White colour - (For Food Grade Packaging) Pigment content - Minimum 27.8% Solid P.U. Resin content - Minimum 9.6% |
1 MT |
Polyol |
72.30 kgs |
| Liquid printing Ink -P.U. Based - in White colour - (For Food Grade Packaging) Pigment content - Minimum 27.8% Solid P.U. Resin content - Minimum 9.6% |
1 MT |
Di-Isocyanate |
15.80 kgs |
| Liquid printing Ink -P.U. Based - in White colour - (For Food Grade Packaging) Pigment content - Minimum 27.8% Solid P.U. Resin content - Minimum 9.6% |
1 MT |
Ink Additives |
30.41 kgs |
| Liquid printing Ink -P.U. Based - in White colour - (For Food Grade Packaging) Pigment content - Minimum 27.8% Solid P.U. Resin content - Minimum 9.6% |
1 MT |
Titanium Dioxide |
278.00 kgs |
| Liquid Printing Ink - P.U. Based - in various Colours - (For Food Grade Packing) Pigment content - Minimum 11%, Solid P.U. Resin content -Minimum 9.6% |
1 MT |
Relevant Solvents, namely, Iso Propyl Alcohol, Methyl Ethyl Ketone |
770.44 kgs. |
| Liquid Printing Ink - P.U. Based - in various Colours - (For Food Grade Packing) Pigment content - Minimum 11%, Solid P.U. Resin content -Minimum 9.6% |
1 MT |
Polyol |
72.20 kgs |
| Liquid Printing Ink - P.U. Based - in various Colours - (For Food Grade Packing) Pigment content - Minimum 11%, Solid P.U. Resin content -Minimum 9.6% |
1 MT |
Di-Isocyanate |
15.83 kgs |
| Liquid Printing Ink - P.U. Based - in various Colours - (For Food Grade Packing) Pigment content - Minimum 11%, Solid P.U. Resin content -Minimum 9.6% |
1 MT |
Ink Additives |
46.45 kgs |
| Liquid Printing Ink - P.U. Based - in various Colours - (For Food Grade Packing) Pigment content - Minimum 11%, Solid P.U. Resin content -Minimum 9.6% |
1 MT |
Pigments (Carbon Black, Insoluble Azo, Azo , Phthalocyanine, Dioxazine) |
110.00 kgs. |
| Red Ink Dispersion (Minimum Pigment content 37%) |
1 kg |
Pigment (Rubine Red/ ) |
0.381 kg |
| Red Ink Dispersion (Minimum Pigment content 37%) |
1 kg |
Petroleum Hydro Carbon Solvent (Distillation range 240ºC-300ºC) |
0.147 kg |
| Red Ink Dispersion (Minimum Pigment content 37%) |
1 kg |
Linseed Alkyd Resin (100% Solid) |
0.073 kg |
| Red Ink Dispersion (Minimum Pigment content 37%) |
1 kg |
Vehicle Rosin Resin (Linseed Rosin Ester Solution 88% Solid content) |
0.441 kg |
| Red Ink Dispersion (Minimum Pigment content 38%) |
1 kg |
Pigment (Rubine Red, ) |
0.391 kg |
| Red Ink Dispersion (Minimum Pigment content 38%) |
1 kg |
Petroleum Hydro Carbon Solvent (Distillation range 240ºC-300ºC) |
0.094 kg |
| Red Ink Dispersion (Minimum Pigment content 38%) |
1 kg |
Linseed Alkyd Resin (100% Solid) |
0.073 kg |
| Red Ink Dispersion (Minimum Pigment content 38%) |
1 kg |
Vehicle Rosin Resin (Linseed Rosin Ester Solution 88% Solid content) |
0.483 kg |
| Blue Ink Dispersion (Minimum Pigment content 38%) |
1 kg |
Pigment (Phthalo Blue) |
0.391 kg |
| Blue Ink Dispersion (Minimum Pigment content 38%) |
1 kg |
Petroleum Hydro Carbon Solvent (Distillation range 240ºC-300ºC) |
0.115 kg |
| Blue Ink Dispersion (Minimum Pigment content 38%) |
1 kg |
Vehicle Rosin Resin (Linseed Rosin Ester Solution 88% Solid content) |
0.535 kg |
| Yellow Ink Dispersion (Minimum Pigment content 31%) |
1 kg |
Pigment (AAA Yellow 12) |
0.319 kg |
| Yellow Ink Dispersion (Minimum Pigment content 31%) |
1 kg |
Petroleum Hydro Carbon Solvent (Distillation range 240ºC-300ºC) |
0.073 kg |
| Yellow Ink Dispersion (Minimum Pigment content 31%) |
1 kg |
Linseed Alkyd Resin (100% Solid) |
0.052 kg |
| Yellow Ink Dispersion (Minimum Pigment content 31%) |
1 kg |
Vehicle Rosin Resin (Linseed Rosin Ester Solution 88% Solid content) |
0.598 kg |
| Green Ink Dispersion (Minimum Pigment content 40.5%) |
1 kg |
Pigment (Phthalo Green) |
0.417 lg |
| Green Ink Dispersion (Minimum Pigment content 40.5%) |
1 kg |
Petroleum Hydro Carbon Solvent (Distillation range 240ºC-300ºC) |
0.115 kg |
| Green Ink Dispersion (Minimum Pigment content 40.5%) |
1 kg |
Vehicle Rosin Resin (Linseed Rosin Ester Solution 88% Solid content) |
0.509 kg |
| Fluorescent Flushed Ink concentrate - Lemon Yellow (Amino Sulphonamide content 47%) |
1 kg |
Ortho-Para Toluene Sulphonamide/ Toluene Sulphonamide (OTPT/ PTS Amide) |
0.322 kg |
| Fluorescent Flushed Ink concentrate - Lemon Yellow (Amino Sulphonamide content 47%) |
1 kg |
Melamine |
0.090 kg |
| Fluorescent Flushed Ink concentrate - Lemon Yellow (Amino Sulphonamide content 47%) |
1 kg |
Formaldehyde |
0.140 kg |
| Fluorescent Flushed Ink concentrate - Lemon Yellow (Amino Sulphonamide content 47%) |
1 kg |
Optical Brightner |
0.001 kg |
| Fluorescent Flushed Ink concentrate - Lemon Yellow (Amino Sulphonamide content 47%) |
1 kg |
Solvent Dyes |
0.028 kg |
| Fluorescent Flushed Ink concentrate - Magenta (Amino Sulphonamide content 47%) |
1 kg |
Ortho-Para Toluene Sulphonamide/ Toluene Sulphonamide (OTPT/PTS Amide) |
0.322 kg |
| Fluorescent Flushed Ink concentrate - Magenta (Amino Sulphonamide content 47%) |
1 kg |
Melamine |
0.079 kg |
| Fluorescent Flushed Ink concentrate - Magenta (Amino Sulphonamide content 47%) |
1 kg |
Formaldehyde |
0.127 kg |
| Fluorescent Flushed Ink concentrate - Magenta (Amino Sulphonamide content 47%) |
1 kg |
Optical Brightner |
0.001 kg |
| Fluorescent Flushed Ink concentrate - Magenta (Amino Sulphonamide content 47%) |
1 kg |
Basic Dyes |
0.031 kg |
| Fluorescent Flushed Ink concentrate - Magenta (Amino Sulphonamide content 47%) |
1 kg |
Solvent Dyes |
0.001 kg |
| Fluorescent Flushed Ink concentrate -Fire (Amino Sulphonamide content 47%) |
1 kg |
Ortho-Para Toluene Sulphonamide/ Toluene Sulphonamide (OTPT/PTS Amide) |
0.322 kg |
| Fluorescent Flushed Ink concentrate -Fire (Amino Sulphonamide content 47%) |
1 kg |
Melamine |
0.079 kg |
| Fluorescent Flushed Ink concentrate -Fire (Amino Sulphonamide content 47%) |
1 kg |
Formaldehyde |
0.122 kg |
| Fluorescent Flushed Ink concentrate -Fire (Amino Sulphonamide content 47%) |
1 kg |
Optical Brightner |
0.001 kg |
| Fluorescent Flushed Ink concentrate -Fire (Amino Sulphonamide content 47%) |
1 kg |
Basic Dyes |
0.012 kg |
| Fluorescent Flushed Ink concentrate -Fire (Amino Sulphonamide content 47%) |
1 kg |
Solvent Dyes |
0.043 kg |
| Fluorescent Flushed Ink concentrate -Pink (Amino Sulphonamide content 47%) |
1 kg |
Ortho-Para Toluene Sulphonamide/ Toluene Sulphonamide (OTPT/ PTS Amide) |
0.322 kg |
| Fluorescent Flushed Ink concentrate -Pink (Amino Sulphonamide content 47%) |
1 kg |
Melamine |
0.079 kg |
| Fluorescent Flushed Ink concentrate -Pink (Amino Sulphonamide content 47%) |
1 kg |
Formaldehyde |
0.122 kg |
| Fluorescent Flushed Ink concentrate -Pink (Amino Sulphonamide content 47%) |
1 kg |
Optical Brightner |
0.001 kg |
| Fluorescent Flushed Ink concentrate -Pink (Amino Sulphonamide content 47%) |
1 kg |
Basic Dyes |
0.023 kg |
| Fluorescent Flushed Ink concentrate -Pink (Amino Sulphonamide content 47%) |
1 kg |
Solvent Dyes |
0.001 kg |
| Photo Initiator Combo containing (1) 2-Ethylhexyl-4-(dimenthlamino) benzote 18.9%, (2) Mixture of 2-isopropylthioxanthone and 4-isopropylthioxanthone 15%, (3) Benzil Dimethyl Ketal (27.9%), (4) Ethyl Michlers Ketone or 4,4-bis 9Diethylamino) benzophenone 27.9% and (5) 2-Methyl-1-{4[methylthio] phenyl}-2-morpholine-propane-1-One 10.2% |
1 kg |
2-Ethylhexyl-4-(dimenthlamino) benzote |
0.193 kg |
| Photo Initiator Combo containing (1) 2-Ethylhexyl-4-(dimenthlamino) benzote 18.9%, (2) Mixture of 2-isopropylthioxanthone and 4-isopropylthioxanthone 15%, (3) Benzil Dimethyl Ketal (27.9%), (4) Ethyl Michlers Ketone or 4,4-bis 9Diethylamino) benzophenone 27.9% and (5) 2-Methyl-1-{4[methylthio] phenyl}-2-morpholine-propane-1-One 10.2% |
1 kg |
Mixture of 2-isopropylthioxanthone and 4-isopropylthioxanthone |
0.153 kg |
| Photo Initiator Combo containing (1) 2-Ethylhexyl-4-(dimenthlamino) benzote 18.9%, (2) Mixture of 2-isopropylthioxanthone and 4-isopropylthioxanthone 15%, (3) Benzil Dimethyl Ketal (27.9%), (4) Ethyl Michlers Ketone or 4,4-bis 9Diethylamino) benzophenone 27.9% and (5) 2-Methyl-1-{4[methylthio] phenyl}-2-morpholine-propane-1-One 10.2% |
1 kg |
Benzil Dimethyl Ketal |
0.285 kg |
| Photo Initiator Combo containing (1) 2-Ethylhexyl-4-(dimenthlamino) benzote 18.9%, (2) Mixture of 2-isopropylthioxanthone and 4-isopropylthioxanthone 15%, (3) Benzil Dimethyl Ketal (27.9%), (4) Ethyl Michlers Ketone or 4,4-bis 9Diethylamino) benzophenone 27.9% and (5) 2-Methyl-1-{4[methylthio] phenyl}-2-morpholine-propane-1-One 10.2% |
1 kg |
Ethyl Michlers Ketone or 4,4-bis (Diethylamino) benzophenone |
0.285 kg |
| Photo Initiator Combo containing (1) 2-Ethylhexyl-4-(dimenthlamino) benzote 18.9%, (2) Mixture of 2-isopropylthioxanthone and 4-isopropylthioxanthone 15%, (3) Benzil Dimethyl Ketal (27.9%), (4) Ethyl Michlers Ketone or 4,4-bis 9Diethylamino) benzophenone 27.9% and (5) 2-Methyl-1-{4[methylthio] phenyl}-2-morpholine-propane-1-One 10.2% |
1 kg |
2-Methyl-1-{4[methylthio] phenyl}-2-morpholine-propane-1-One |
0.102 kg |
| Ink Flow Improver containing minimum 95% Texanol Isobutyrate |
1 kg |
Petroleum Distillate ( 240-230 Degree Celsius) |
0.051 kg |
| Ink Flow Improver containing minimum 95% Texanol Isobutyrate |
1 kg |
Texanol Isobutyrate |
0.969 kg |
| Printing Ink Vehicle Special Gel - Linseed Oil Base (based on Phenolic and Alkyd Resin having Solid Resin content 64%-66%) |
100 kg |
Petroleum Distillate (Distillation Range 240-330 Degree C |
34.800 kgs |
| Printing Ink Vehicle Special Gel - Linseed Oil Base (based on Phenolic and Alkyd Resin having Solid Resin content 64%-66%) |
100 kg |
Bis-Phenol-A |
0.200 kgs |
| Printing Ink Vehicle Special Gel - Linseed Oil Base (based on Phenolic and Alkyd Resin having Solid Resin content 64%-66%) |
100 kg |
Butylated Hydroxy Toluene |
0.50 kgs |
| Printing Ink Vehicle Special Gel - Linseed Oil Base (based on Phenolic and Alkyd Resin having Solid Resin content 64%-66%) |
100 kg |
Di-Cyclopentadiene |
20.480 kgs |
| Printing Ink Vehicle Special Gel - Linseed Oil Base (based on Phenolic and Alkyd Resin having Solid Resin content 64%-66%) |
100 kg |
Slyvablend FA 7002/Dimer Acid |
0.450 kgs |
| Printing Ink Vehicle Special Gel - Linseed Oil Base (based on Phenolic and Alkyd Resin having Solid Resin content 64%-66%) |
100 kg |
Fumaric Acid |
3.350 kgs |
| Printing Ink Vehicle Special Gel - Linseed Oil Base (based on Phenolic and Alkyd Resin having Solid Resin content 64%-66%) |
100 kg |
Glycerine |
0.006 kgs |
| Printing Ink Vehicle Special Gel - Linseed Oil Base (based on Phenolic and Alkyd Resin having Solid Resin content 64%-66%) |
100 kg |
Isophthalic Acid |
2.000 kgs |
| Printing Ink Vehicle Special Gel - Linseed Oil Base (based on Phenolic and Alkyd Resin having Solid Resin content 64%-66%) |
100 kg |
Light Magnesium Oxide |
0.011 kgs |
| Printing Ink Vehicle Special Gel - Linseed Oil Base (based on Phenolic and Alkyd Resin having Solid Resin content 64%-66%) |
100 kg |
Neodene |
2.600 kgs |
| Printing Ink Vehicle Special Gel - Linseed Oil Base (based on Phenolic and Alkyd Resin having Solid Resin content 64%-66%) |
100 kg |
Nonyl Phenol |
13.200 kgs |
| Printing Ink Vehicle Special Gel - Linseed Oil Base (based on Phenolic and Alkyd Resin having Solid Resin content 64%-66%) |
100 kg |
Oxyaluminium Octoate |
0.500 kgs |
| Printing Ink Vehicle Special Gel - Linseed Oil Base (based on Phenolic and Alkyd Resin having Solid Resin content 64%-66%) |
100 kg |
Tertiary Butyl Catechol |
0.010 kgs |
| Printing Ink Vehicle Special Gel - Linseed Oil Base (based on Phenolic and Alkyd Resin having Solid Resin content 64%-66%) |
100 kg |
Tertiary Butyl Phenol (PTBP) |
0.450 kgs |
| Printing Ink Vehicle Special Gel - Linseed Oil Base (based on Phenolic and Alkyd Resin having Solid Resin content 64%-66%) |
100 kg |
Paraformaldehyde |
2.200 kgs |
| Printing Ink Vehicle Special Gel - Linseed Oil Base (based on Phenolic and Alkyd Resin having Solid Resin content 64%-66%) |
100 kg |
Pentaery thritol |
3.050 kgs |
| Printing Ink Vehicle Special Gel - Linseed Oil Base (based on Phenolic and Alkyd Resin having Solid Resin content 64%-66%) |
100 kg |
Refined Linseed Oil |
8.800 kgs |
| Printing Ink Vehicle Special Gel - Linseed Oil Base (based on Phenolic and Alkyd Resin having Solid Resin content 64%-66%) |
100 kg |
Rosin |
13.800 kgs |
| Printing Ink Vehicle Special Gel - Linseed Oil Base (based on Phenolic and Alkyd Resin having Solid Resin content 64%-66%) |
100 kg |
Texanol Isobutyrate |
8.100 kgs |
| Printing Ink Vehicle Special Gel - Linseed Oil Base (based on Phenolic and Alkyd Resin having Solid Resin content 64%-66%) |
100 kg |
Tri Phenyl Phosphite |
0.012 kgs |
| Printing Ink Vehicle Special Gel - Linseed Oil Base (based on Phenolic and Alkyd Resin having Solid Resin content 64%-66%) |
100 kg |
Trimethylol Propane |
0.700 kgs |
| Printing Ink Vehicle - Plain (Solid content 61 +/- 1%) Linseed Oil Base or Soya Bean Oil base) |
1 kg |
Relevant Alkyd Resin namely Soya Long Oil Alkyd resin of 70% Oil length having Solid content 100% /Linseed Oil Based Alkyd resin (Long Oil Length) |
0.105 kg |
| Printing Ink Vehicle - Plain (Solid content 61 +/- 1%) Linseed Oil Base or Soya Bean Oil base) |
1 kg |
Soya Bean Oil |
0.051 kg |
| Printing Ink Vehicle - Plain (Solid content 61 +/- 1%) Linseed Oil Base or Soya Bean Oil base) |
1 kg |
Petroleum Distillate (Distillation Range 240-330 Degree Centigrade) |
0.402 kg |
| Printing Ink Vehicle - Plain (Solid content 61 +/- 1%) Linseed Oil Base or Soya Bean Oil base) |
1 kg |
Phenol Modified Rosin Ester / Rosin Modified Phenolic Resin (Technical Specification in Acid Values 25 max softening Point (R&B) 110 Degree - 120 Degree Centigrade) |
0.367kg |
| Printing Ink Vehicle - Plain (Solid content 61 +/- 1%) Linseed Oil Base or Soya Bean Oil base) |
1 kg |
Structed Phenolic Modified Rosin Ester |
0.108 kg |
| Printing Ink Vehicle - Plain (Solid content 61 +/- 1%) Linseed Oil Base or Soya Bean Oil base) |
1 kg |
Aluminium Chelate |
0.010 kg |
| Fluorescent Flushed Ink Concentrate General Green (Amino Sulphonamide content 47%) |
1 kg |
O - Toluene Sulphonamide / P-Toluene Sulphonamide (OTPT/PTS Amide) |
0.350 kg |
| Fluorescent Flushed Ink Concentrate General Green (Amino Sulphonamide content 47%) |
1 kg |
Melamine |
0.087 kg |
| Fluorescent Flushed Ink Concentrate General Green (Amino Sulphonamide content 47%) |
1 kg |
Formaldehyde |
0.132 kg |
| Fluorescent Flushed Ink Concentrate General Green (Amino Sulphonamide content 47%) |
1 kg |
Optical Brightener |
0.001 kg |
| Fluorescent Flushed Ink Concentrate General Green (Amino Sulphonamide content 47%) |
1 kg |
Solvent dyes |
0.034 kg |
| Fluorescent Flushed Ink Concentrate Saturn Yellow (Amino Sulphonamide content 47%) |
1 kg |
O - Toluene Sulphonamide / P-Toluene Sulphonamide (OTPT/PTS Amide) |
0.350 kg |
| Fluorescent Flushed Ink Concentrate Saturn Yellow (Amino Sulphonamide content 47%) |
1 kg |
Melamine |
0.087 kg |
| Fluorescent Flushed Ink Concentrate Saturn Yellow (Amino Sulphonamide content 47%) |
1 kg |
Formaldehyde |
0.132 kg |
| Fluorescent Flushed Ink Concentrate Saturn Yellow (Amino Sulphonamide content 47%) |
1 kg |
Optical Brightener |
0.001 kg |
| Fluorescent Flushed Ink Concentrate Saturn Yellow (Amino Sulphonamide content 47%) |
1 kg |
Solvent Dyes |
0.068 kg |
| Fluorescent Ink Concentrate BLUE IV - Invisible Euroblue (Amino Sulphonamide Based matrix content 48%) |
1 kg |
O - Toluene Sulphonamide / P-Toluene Sulphonamide (OTPT/PTS Amide) |
0.365 kg |
| Fluorescent Ink Concentrate BLUE IV - Invisible Euroblue (Amino Sulphonamide Based matrix content 48%) |
1 kg |
Melamine |
0.089 kg |
| Fluorescent Ink Concentrate BLUE IV - Invisible Euroblue (Amino Sulphonamide Based matrix content 48%) |
1 kg |
Formaldehyde |
0.126 kg |
| Fluorescent Ink Concentrate BLUE IV - Invisible Euroblue (Amino Sulphonamide Based matrix content 48%) |
1 kg |
Optical Brightener |
0.054 kg |
