Other transformers:Having a power handling capacity not exceeding 1 kVA.
HS codes falls under this category.
| HS Codes | Duty Drawback | Unit | Drawback Rate | Drawback cap per unit in Rs. |
| 85043100 | Duty Drawback | - | 2 | - |
PLEASE NOTE: TOTAL INCENTIVE EQUALS SUM OF MEIS AND DUTY DRAWBACK.FOR INSTANCE, FOR Other FALLING UNDER HS CODE: 150290 INCENTIVES FROM THE GOVERNMENT IS 0.15%.
| HS Codes | Product Description | Reward under MEIS |
| 85043100 | Other transformers:Having a power handling capacity not exceeding 1 kVA | 0.8%% |
| Export Item | Quantity | Import Item | Qty Allowed. |
| Cast Resin Parallel Branch joints Box suitable for 4 x 185 sq.mm main cable and two branches of 4 x 185 sq.mm, XLPE/SWA/PVC, 600/1000 V cable | 1 No. | Synthetic Resin (To be specified) | 18.345 kgs |
| Cast Resin Parallel Branch joints Box suitable for 4 x 185 sq.mm main cable and two branches of 4 x 185 sq.mm, XLPE/SWA/PVC, 600/1000 V cable | 1 No. | Isocynate/Poly Isocynate (Hardner) | 6.115 kgs |
| Cast Resin Parallel Branch joints Box suitable for 4 x 185 sq.mm main cable and two branches of 4 x 185 sq.mm, XLPE/SWA/PVC, 600/1000 V cable | 1 No. | Catalyst | 0.247 kg |
| Cast Resin Parallel Branch joints Box suitable for 4 x 185 sq.mm main cable and two branches of 4 x 185 sq.mm, XLPE/SWA/PVC, 600/1000 V cable | 1 No. | High Impact Polystyrene Granules | 8.530 kgs |
| Cast Resin Parallel Branch joints Box suitable for 4 x 185 sq.mm main cable and two branches of 4 x 185 sq.mm, XLPE/SWA/PVC, 600/1000 V cable | 1 No. | Ethylene Propylene Rubber (EPR insulating tape) | 0.215 kg |
| Cast Resin Parallel Branch joints Box suitable for 4 x 185 sq.mm main cable and two branches of 4 x 185 sq.mm, XLPE/SWA/PVC, 600/1000 V cable | 1 No. | Mastic Sealing Tape | 0.205 kg |
| Cast Resin Parallel Branch joints Box suitable for 4 x 185 sq.mm main cable and two branches of 4 x 185 sq.mm, XLPE/SWA/PVC, 600/1000 V cable | 1 No. | Thermofit Sleeve | 0.880 Mtrs |
| Cast Resin Parallel Branch joints Box suitable for 4 x 185 sq.mm main cable and two branches of 4 x 185 sq.mm, XLPE/SWA/PVC, 600/1000 V cable | 1 No. | Copper wire/rod | 2.980 kgs |
| Cast Resin Parallel joints Box suitable for 4 x 300 sq.mm main cable and two branches of 4 x 300 sq.mm, XLPE/SWA/PVC, 600/1000 V cable | 1 No. | Synthetic Resin (To be specified) | 34.290 kgs |
| Cast Resin Parallel joints Box suitable for 4 x 300 sq.mm main cable and two branches of 4 x 300 sq.mm, XLPE/SWA/PVC, 600/1000 V cable | 1 No. | Isocynate/Poly Isocynate (Hardner) | 11.430 kgs |
| Cast Resin Parallel joints Box suitable for 4 x 300 sq.mm main cable and two branches of 4 x 300 sq.mm, XLPE/SWA/PVC, 600/1000 V cable | 1 No. | Catalyst | 0.462 kg |
| Cast Resin Parallel joints Box suitable for 4 x 300 sq.mm main cable and two branches of 4 x 300 sq.mm, XLPE/SWA/PVC, 600/1000 V cable | 1 No. | High Impact Polystyrene Granules | 11.08 kgs |
| Cast Resin Parallel joints Box suitable for 4 x 300 sq.mm main cable and two branches of 4 x 300 sq.mm, XLPE/SWA/PVC, 600/1000 V cable | 1 No. | Ethylene Propylene Rubber (EPR insulating tape) | 0.215 kg |
| Cast Resin Parallel joints Box suitable for 4 x 300 sq.mm main cable and two branches of 4 x 300 sq.mm, XLPE/SWA/PVC, 600/1000 V cable | 1 No. | Mastic Sealing Tape | 0.205 kg |
| Cast Resin Parallel joints Box suitable for 4 x 300 sq.mm main cable and two branches of 4 x 300 sq.mm, XLPE/SWA/PVC, 600/1000 V cable | 1 No. | Thermofit Sleeve | 0.880 Mtrs |
| Cast Resin Parallel joints Box suitable for 4 x 300 sq.mm main cable and two branches of 4 x 300 sq.mm, XLPE/SWA/PVC, 600/1000 V cable | 1 No. | Copper wire/rod | 2.980 kgs |
| Cast Resin Straight joints suitable for 4 x 185 sq.mm, XLPE /SWA/PVC, 600/1000 V cable | 1 No. | Synthetic Resin (To be specified) | 9.360 kgs |
| Cast Resin Straight joints suitable for 4 x 185 sq.mm, XLPE /SWA/PVC, 600/1000 V cable | 1 No. | Isocynate/Poly Isocynate (Hardner) | 3.120 kgs |
| Cast Resin Straight joints suitable for 4 x 185 sq.mm, XLPE /SWA/PVC, 600/1000 V cable | 1 No. | Catalyst | 0.125 kg |
| Cast Resin Straight joints suitable for 4 x 185 sq.mm, XLPE /SWA/PVC, 600/1000 V cable | 1 No. | High Impact Polystyrene | 4.65 kgs |
| Cast Resin Straight joints suitable for 4 x 185 sq.mm, XLPE /SWA/PVC, 600/1000 V cable | 1 No. | Ethylene Propylene Rubber (EPR insulating tape) | 0.215 kgs |
| Cast Resin Straight joints suitable for 4 x 185 sq.mm, XLPE /SWA/PVC, 600/1000 V cable | 1 No. | Mastic Sealing Tape | 0.205 kg |
| Cast Resin Straight joints suitable for 4 x 185 sq.mm, XLPE /SWA/PVC, 600/1000 V cable | 1 No. | Thermofit Sleeve | 0.780 Mtrs |
| Cast Resin Straight joints suitable for 4 x 185 sq.mm, XLPE /SWA/PVC, 600/1000 V cable | 1 No. | Copper wire/rod | 0.370 kg |
| Cast Resin Straight joints suitable for 4 x 300 sq.mm, XLPE /SWA/PVC, 600/1000 V cable | 1 No. | Synthetic Resin (To be specified) | 15.975 kgs |
| Cast Resin Straight joints suitable for 4 x 300 sq.mm, XLPE /SWA/PVC, 600/1000 V cable | 1 No. | Isocynate/Poly Isocynate (Hardner) | 5.320 kgs |
| Cast Resin Straight joints suitable for 4 x 300 sq.mm, XLPE /SWA/PVC, 600/1000 V cable | 1 No. | Catalyst | 0.215 kg |
| Cast Resin Straight joints suitable for 4 x 300 sq.mm, XLPE /SWA/PVC, 600/1000 V cable | 1 No. | High Impact Polystyrene Granules | 5.600 kgs |
| Cast Resin Straight joints suitable for 4 x 300 sq.mm, XLPE /SWA/PVC, 600/1000 V cable | 1 No. | Ethylene Propylene Rubber (EPR insulating tape) | 0.215 kg |
| Cast Resin Straight joints suitable for 4 x 300 sq.mm, XLPE /SWA/PVC, 600/1000 V cable | 1 No. | Mastic Sealing Tape | 0.205 kg |
| Cast Resin Straight joints suitable for 4 x 300 sq.mm, XLPE /SWA/PVC, 600/1000 V cable | 1 No. | Thermofit Sleeve | 0.880 Mtrs |
| Cast Resin Straight joints suitable for 4 x 300 sq.mm, XLPE /SWA/PVC, 600/1000 V cable | 1 No. | Copper wire/rod | 0.370 kg |
| Cast Resin Straight through joints suitable for 4 x 70 sq.mm, XLPE /SWA/PVC, 600/1000 V cable | 1 No. | Synthetic Resin (To be specified) | 3.6 kgs |
| Cast Resin Straight through joints suitable for 4 x 70 sq.mm, XLPE /SWA/PVC, 600/1000 V cable | 1 No. | Isocynate/Poly Isocynate (Hardner) | 1.22 kgs |
| Cast Resin Straight through joints suitable for 4 x 70 sq.mm, XLPE /SWA/PVC, 600/1000 V cable | 1 No. | Catalyst | 0.048 kgs |
| Cast Resin Straight through joints suitable for 4 x 70 sq.mm, XLPE /SWA/PVC, 600/1000 V cable | 1 No. | High Impact Polystyrene Granules | 2.110 kgs |
| Cast Resin Straight through joints suitable for 4 x 70 sq.mm, XLPE /SWA/PVC, 600/1000 V cable | 1 No. | Ethylene Propylene Rubber (EPR insulating tape) | 0.215 kgs |
| Cast Resin Straight through joints suitable for 4 x 70 sq.mm, XLPE /SWA/PVC, 600/1000 V cable | 1 No. | Mastic Sealing Tape | 0.205 kgs |
| Cast Resin Straight through joints suitable for 4 x 70 sq.mm, XLPE /SWA/PVC, 600/1000 V cable | 1 No. | Thermofit Sleeve | 0.590 Mtrs. |
| Cast Resin Straight through joints suitable for 4 x 70 sq.mm, XLPE /SWA/PVC, 600/1000 V cable | 1 No. | Copper wire/rod | 0.303 kgs |
| Current Transformers above 245 KV (Outdoor Type)(Containing 275 kg of item 1, 280 kg of item 2, 150 kg of item 3, 400 & 150 kg of item 5 and 450 or 540 Ltr. of item 6) | 1 No. | CRGO Steel Laminations/ Sheets/ Coils with insulating coating of inorganic/ organic material OR | 316.25 kgs |
| Current Transformers above 245 KV (Outdoor Type)(Containing 275 kg of item 1, 280 kg of item 2, 150 kg of item 3, 400 & 150 kg of item 5 and 450 or 540 Ltr. of item 6) | 1 No. | Nickel Iron Magnetic Strips/ Sheets/ Coils | 302.50 kgs |
| Current Transformers above 245 KV (Outdoor Type)(Containing 275 kg of item 1, 280 kg of item 2, 150 kg of item 3, 400 & 150 kg of item 5 and 450 or 540 Ltr. of item 6) | 1 No. | Copper Winding Wires/ Strips/Wire Bars/ Wire Rods/ Cathodes | 282.80 kgs |
| Current Transformers above 245 KV (Outdoor Type)(Containing 275 kg of item 1, 280 kg of item 2, 150 kg of item 3, 400 & 150 kg of item 5 and 450 or 540 Ltr. of item 6) | 1 No. | Electrical Grade Insulating Paper | 165 kgs |
| Current Transformers above 245 KV (Outdoor Type)(Containing 275 kg of item 1, 280 kg of item 2, 150 kg of item 3, 400 & 150 kg of item 5 and 450 or 540 Ltr. of item 6) | 1 No. | Porcelain Insulator | 1 No. |
| Current Transformers above 245 KV (Outdoor Type)(Containing 275 kg of item 1, 280 kg of item 2, 150 kg of item 3, 400 & 150 kg of item 5 and 450 or 540 Ltr. of item 6) | 1 No. | Mild Steel Sheets/ Coils OR | 440 kgs |
| Current Transformers above 245 KV (Outdoor Type)(Containing 275 kg of item 1, 280 kg of item 2, 150 kg of item 3, 400 & 150 kg of item 5 and 450 or 540 Ltr. of item 6) | 1 No. | Aluminium Sheets/ Plates/ Ingots | 157.50 kgs |
| Current Transformers above 245 KV (Outdoor Type)(Containing 275 kg of item 1, 280 kg of item 2, 150 kg of item 3, 400 & 150 kg of item 5 and 450 or 540 Ltr. of item 6) | 1 No. | Transformer Oil OR | 472.50 Litres |
| Current Transformers above 245 KV (Outdoor Type)(Containing 275 kg of item 1, 280 kg of item 2, 150 kg of item 3, 400 & 150 kg of item 5 and 450 or 540 Ltr. of item 6) | 1 No. | Transformer Oil Base Stock | 567 Litres |
| Current Transformers above 0.66 KV upto & including 12.5 KV (Indoor Type)(Containing 6.50 kg of item 1, 7 kg of item 2, 0.20 kg of item 3, 3 kg of item 4 and 5 kg of item 5) | 1 No. | CRGO Steel Laminations/ Sheets/ Coils with insulating coating of inorganic/ organic material OR | 7.475 kgs |
| Current Transformers above 0.66 KV upto & including 12.5 KV (Indoor Type)(Containing 6.50 kg of item 1, 7 kg of item 2, 0.20 kg of item 3, 3 kg of item 4 and 5 kg of item 5) | 1 No. | Nickel Iron Magnetic Strips/ Sheets/ Coils | 7.15 kgs |
| Current Transformers above 0.66 KV upto & including 12.5 KV (Indoor Type)(Containing 6.50 kg of item 1, 7 kg of item 2, 0.20 kg of item 3, 3 kg of item 4 and 5 kg of item 5) | 1 No. | Copper Winding Wires/ Strips/ Wire Bars/ Wire Rods/ Cathodes | 7.07 kgs |
| Current Transformers above 0.66 KV upto & including 12.5 KV (Indoor Type)(Containing 6.50 kg of item 1, 7 kg of item 2, 0.20 kg of item 3, 3 kg of item 4 and 5 kg of item 5) | 1 No. | Electrical Grade Insulating Paper | 0.22 kg |
| Current Transformers above 0.66 KV upto & including 12.5 KV (Indoor Type)(Containing 6.50 kg of item 1, 7 kg of item 2, 0.20 kg of item 3, 3 kg of item 4 and 5 kg of item 5) | 1 No. | Mild Steel Steets/ Coils | 3.30 kgs |
| Current Transformers above 0.66 KV upto & including 12.5 KV (Indoor Type)(Containing 6.50 kg of item 1, 7 kg of item 2, 0.20 kg of item 3, 3 kg of item 4 and 5 kg of item 5) | 1 No. | Epoxy Resin | 5.25 kgs |
| Current Transformers above 12.5 KV upto & including 24 KV (Indoor Type)(Containing 9 kg of item 1, 9 kg of item 2, 0.30 kg of item 3, 3 kg of item 4 and 10 kg of item 5) | 1 No. | CRGO Steel Laminations/ Sheets/ Coils with insulating coating of inorganic/ organic material OR | 10.35 kgs |
| Current Transformers above 12.5 KV upto & including 24 KV (Indoor Type)(Containing 9 kg of item 1, 9 kg of item 2, 0.30 kg of item 3, 3 kg of item 4 and 10 kg of item 5) | 1 No. | Nickel Iron Magnetic Strips/ Sheets/ Coils | 9.90 kgs |
| Current Transformers above 12.5 KV upto & including 24 KV (Indoor Type)(Containing 9 kg of item 1, 9 kg of item 2, 0.30 kg of item 3, 3 kg of item 4 and 10 kg of item 5) | 1 No. | Copper winding Wires/ Strips/Wire Bars/Wire Rods/ Cathodes | 9.09 kgs |
| Current Transformers above 12.5 KV upto & including 24 KV (Indoor Type)(Containing 9 kg of item 1, 9 kg of item 2, 0.30 kg of item 3, 3 kg of item 4 and 10 kg of item 5) | 1 No. | Electrical Grade Insulating paper | 0.33 kg |
| Current Transformers above 12.5 KV upto & including 24 KV (Indoor Type)(Containing 9 kg of item 1, 9 kg of item 2, 0.30 kg of item 3, 3 kg of item 4 and 10 kg of item 5) | 1 No. | Mild Steel Sheets/ Coils | 3.30 kgs |
| Current Transformers above 12.5 KV upto & including 24 KV (Indoor Type)(Containing 9 kg of item 1, 9 kg of item 2, 0.30 kg of item 3, 3 kg of item 4 and 10 kg of item 5) | 1 No. | Epoxy Resin | 10.50 kgs |
| Current Transformers above 145 KV upto & including 245 KV (Outdoor Type)(Containing 170 kg of item 1, 145 kg of item 2, 100 kg of item 3, 270 & 100 kg of item 5 and 260 or 312 Ltr. of item 6) | 1 No. | CRGO Steel Laminations/ Sheets/ Coils with insulating coating of inorganic/ organic material OR | 195.50 kgs |
| Current Transformers above 145 KV upto & including 245 KV (Outdoor Type)(Containing 170 kg of item 1, 145 kg of item 2, 100 kg of item 3, 270 & 100 kg of item 5 and 260 or 312 Ltr. of item 6) | 1 No. | Nickel Iron Magnetic Strips/Sheets/ Coils | 187.0 kgs |
| Current Transformers above 145 KV upto & including 245 KV (Outdoor Type)(Containing 170 kg of item 1, 145 kg of item 2, 100 kg of item 3, 270 & 100 kg of item 5 and 260 or 312 Ltr. of item 6) | 1 No. | Copper Winding Wires/ Strips/ Wire Bars/ Wire Rods/ Cathodes | 146.45 kgs |
| Current Transformers above 145 KV upto & including 245 KV (Outdoor Type)(Containing 170 kg of item 1, 145 kg of item 2, 100 kg of item 3, 270 & 100 kg of item 5 and 260 or 312 Ltr. of item 6) | 1 No. | Electrical Grade Insulating paper | 110 kgs |
| Current Transformers above 145 KV upto & including 245 KV (Outdoor Type)(Containing 170 kg of item 1, 145 kg of item 2, 100 kg of item 3, 270 & 100 kg of item 5 and 260 or 312 Ltr. of item 6) | 1 No. | Porcelain Insulator | 1 No. |
| Current Transformers above 145 KV upto & including 245 KV (Outdoor Type)(Containing 170 kg of item 1, 145 kg of item 2, 100 kg of item 3, 270 & 100 kg of item 5 and 260 or 312 Ltr. of item 6) | 1 No. | Mild Steel Sheets/ Coils OR | 297 kgs |
| Current Transformers above 145 KV upto & including 245 KV (Outdoor Type)(Containing 170 kg of item 1, 145 kg of item 2, 100 kg of item 3, 270 & 100 kg of item 5 and 260 or 312 Ltr. of item 6) | 1 No. | Aluminium Sheets/ Plates/ Ingots | 105 kgs |
| Current Transformers above 145 KV upto & including 245 KV (Outdoor Type)(Containing 170 kg of item 1, 145 kg of item 2, 100 kg of item 3, 270 & 100 kg of item 5 and 260 or 312 Ltr. of item 6) | 1 No. | Transformer Oil OR | 273 Litres |
| Current Transformers above 145 KV upto & including 245 KV (Outdoor Type)(Containing 170 kg of item 1, 145 kg of item 2, 100 kg of item 3, 270 & 100 kg of item 5 and 260 or 312 Ltr. of item 6) | 1 No. | Transformer Oil Base Stock | 327.60 Litres |
| Current Transformers above 24 KV (Indoor Type)(Containing 12 kg of item 1, 12 kg of item 2, 0.50 kg of item 3, 4 kg of item 4 and 15 kg of item 5) | 1 No. | CRGO Steel Laminations/ Sheets/ Coils with insulating coating of inorganic/ organic material OR | 13.80 kgs |
| Current Transformers above 24 KV (Indoor Type)(Containing 12 kg of item 1, 12 kg of item 2, 0.50 kg of item 3, 4 kg of item 4 and 15 kg of item 5) | 1 No. | Nickel Iron Magnetic Strips/ Sheets/ Coils | 13.20 kgs |
| Current Transformers above 24 KV (Indoor Type)(Containing 12 kg of item 1, 12 kg of item 2, 0.50 kg of item 3, 4 kg of item 4 and 15 kg of item 5) | 1 No. | Copper Winding Wires/ Strips/ Wire Bars/ Wire Rods/ Cathodes | 12.12 kgs |
| Current Transformers above 24 KV (Indoor Type)(Containing 12 kg of item 1, 12 kg of item 2, 0.50 kg of item 3, 4 kg of item 4 and 15 kg of item 5) | 1 No. | Electrical Grade Insulating Paper | 0.55 kg |
| Current Transformers above 24 KV (Indoor Type)(Containing 12 kg of item 1, 12 kg of item 2, 0.50 kg of item 3, 4 kg of item 4 and 15 kg of item 5) | 1 No. | Mild Steel Sheets/ Coils | 4.40 kgs |
| Current Transformers above 24 KV (Indoor Type)(Containing 12 kg of item 1, 12 kg of item 2, 0.50 kg of item 3, 4 kg of item 4 and 15 kg of item 5) | 1 No. | Epoxy Resin | 15.75 kgs |
| Current Transformers above 36 KV upto & including 72.5 KV (Outdoor Type)(Containing 45 kg of item 1, 32 kg of item 2, 7.50 kg of item 3, 65 kg of item 5 and 60 or 72 Ltr. of item 6) | 1 No. | CRGO Steel Laminations/ Sheets/ Coils with insulating coating of inorganic/ organic material OR | 51.75 kgs |
| Current Transformers above 36 KV upto & including 72.5 KV (Outdoor Type)(Containing 45 kg of item 1, 32 kg of item 2, 7.50 kg of item 3, 65 kg of item 5 and 60 or 72 Ltr. of item 6) | 1 No. | Nickel Iron Magnetic Strips/ Sheets/ Coils | 49.50 kgs |
| Current Transformers above 36 KV upto & including 72.5 KV (Outdoor Type)(Containing 45 kg of item 1, 32 kg of item 2, 7.50 kg of item 3, 65 kg of item 5 and 60 or 72 Ltr. of item 6) | 1 No. | Copper Winding Wires/ Strips/ Wire Bars/ Wire Rods/ Cathodes | 32.32 kgs |
| Current Transformers above 36 KV upto & including 72.5 KV (Outdoor Type)(Containing 45 kg of item 1, 32 kg of item 2, 7.50 kg of item 3, 65 kg of item 5 and 60 or 72 Ltr. of item 6) | 1 No. | Electrical Grade Indulating paper | 8.25 kgs |
| Current Transformers above 36 KV upto & including 72.5 KV (Outdoor Type)(Containing 45 kg of item 1, 32 kg of item 2, 7.50 kg of item 3, 65 kg of item 5 and 60 or 72 Ltr. of item 6) | 1 No. | Porcelain Insulator | 1 No. |
| Current Transformers above 36 KV upto & including 72.5 KV (Outdoor Type)(Containing 45 kg of item 1, 32 kg of item 2, 7.50 kg of item 3, 65 kg of item 5 and 60 or 72 Ltr. of item 6) | 1 No. | Mild Steel Sheets/ Coils | 71.50 kgs |
| Current Transformers above 36 KV upto & including 72.5 KV (Outdoor Type)(Containing 45 kg of item 1, 32 kg of item 2, 7.50 kg of item 3, 65 kg of item 5 and 60 or 72 Ltr. of item 6) | 1 No. | Transformer Oil OR | 63.0 Litres |
| Current Transformers above 36 KV upto & including 72.5 KV (Outdoor Type)(Containing 45 kg of item 1, 32 kg of item 2, 7.50 kg of item 3, 65 kg of item 5 and 60 or 72 Ltr. of item 6) | 1 No. | Transformer Oil Base Stock | 75.60 Litres |
| Current Transformers above 72.5 KV upto & including 145 KV (Outdoor Type)(Containing 120 kg of item 1, 45 kg of item 2, 50 kg of item 3, 90 kg & 45 kg of item 5 and 185 or 222 Ltr. of item 6) | 1 No. | CRGO Steel Laminations/ Sheets/ Coils with insulating coating of inorganic/ organic material OR | 138 kgs |
| Current Transformers above 72.5 KV upto & including 145 KV (Outdoor Type)(Containing 120 kg of item 1, 45 kg of item 2, 50 kg of item 3, 90 kg & 45 kg of item 5 and 185 or 222 Ltr. of item 6) | 1 No. | Nickel Iron Magnetic Strips/ Sheets/ Coils | 132 kgs |
| Current Transformers above 72.5 KV upto & including 145 KV (Outdoor Type)(Containing 120 kg of item 1, 45 kg of item 2, 50 kg of item 3, 90 kg & 45 kg of item 5 and 185 or 222 Ltr. of item 6) | 1 No. | Copper Winding Wires/ Strips/ Wire Bars/ Wire Rods/ Cathodes | 45.45 kgs |
| Current Transformers above 72.5 KV upto & including 145 KV (Outdoor Type)(Containing 120 kg of item 1, 45 kg of item 2, 50 kg of item 3, 90 kg & 45 kg of item 5 and 185 or 222 Ltr. of item 6) | 1 No. | Electrical Grade Insulating paper | 55.0 kgs |
| Current Transformers above 72.5 KV upto & including 145 KV (Outdoor Type)(Containing 120 kg of item 1, 45 kg of item 2, 50 kg of item 3, 90 kg & 45 kg of item 5 and 185 or 222 Ltr. of item 6) | 1 No. | Porcelain Insulator | 1 No. |
| Current Transformers above 72.5 KV upto & including 145 KV (Outdoor Type)(Containing 120 kg of item 1, 45 kg of item 2, 50 kg of item 3, 90 kg & 45 kg of item 5 and 185 or 222 Ltr. of item 6) | 1 No. | Mild Steel Sheets/ Coils OR | 99 kgs |
| Current Transformers above 72.5 KV upto & including 145 KV (Outdoor Type)(Containing 120 kg of item 1, 45 kg of item 2, 50 kg of item 3, 90 kg & 45 kg of item 5 and 185 or 222 Ltr. of item 6) | 1 No. | Aluminium Sheets/ Plates/ Ingots | 47.25 kgs |
| Current Transformers above 72.5 KV upto & including 145 KV (Outdoor Type)(Containing 120 kg of item 1, 45 kg of item 2, 50 kg of item 3, 90 kg & 45 kg of item 5 and 185 or 222 Ltr. of item 6) | 1 No. | Transformer Oil OR | 194.25 Litres |
| Current Transformers above 72.5 KV upto & including 145 KV (Outdoor Type)(Containing 120 kg of item 1, 45 kg of item 2, 50 kg of item 3, 90 kg & 45 kg of item 5 and 185 or 222 Ltr. of item 6) | 1 No. | Transformer Oil Base Stock | 233.10 Litres |
| Current Transformers upto & including 0.66 KV (Indoor Tyre)(Containing 1 kg of item 1, 1 kg of item 2, 0.05 kg of item 3 and 1 kg of item 4) | 1 No. | CRGO Steel Laminations/ Sheets/ Coils with insulating coating of inorganic/ organic material OR | 1.15 kg |
| Current Transformers upto & including 0.66 KV (Indoor Tyre)(Containing 1 kg of item 1, 1 kg of item 2, 0.05 kg of item 3 and 1 kg of item 4) | 1 No. | Nickel Iron Magnetic Strips/ Sheets/Coils | 1.10 kg |
| Current Transformers upto & including 0.66 KV (Indoor Tyre)(Containing 1 kg of item 1, 1 kg of item 2, 0.05 kg of item 3 and 1 kg of item 4) | 1 No. | Copper Winding Wires/ Strips/Wire Bars/ Wire Rods/ Cathodes | 1.01 kg |
| Current Transformers upto & including 0.66 KV (Indoor Tyre)(Containing 1 kg of item 1, 1 kg of item 2, 0.05 kg of item 3 and 1 kg of item 4) | 1 No. | Electrical Grade Insulating Paper | 0.055 kg |
| Current Transformers upto & including 0.66 KV (Indoor Tyre)(Containing 1 kg of item 1, 1 kg of item 2, 0.05 kg of item 3 and 1 kg of item 4) | 1 No. | Epoxy Resin | 1.05 kg |
| Current Transformers upto & including 36 KV (Outdoor Type)(Containing 23 kg of item 1, 20 kg of item 2, 3.50 kg of item 3, 45 kg of item 5 and 35 or 42 Ltr. of item 6) | 1 No. | CRGO Steel Laminations/ Sheets/ Coils with insulating coating of inorganic/ organic material OR | 26.45 kgs |
| Current Transformers upto & including 36 KV (Outdoor Type)(Containing 23 kg of item 1, 20 kg of item 2, 3.50 kg of item 3, 45 kg of item 5 and 35 or 42 Ltr. of item 6) | 1 No. | Nickel Iron Magnetic Strips/ Sheets/ Coils | 25.30 kgs |
| Current Transformers upto & including 36 KV (Outdoor Type)(Containing 23 kg of item 1, 20 kg of item 2, 3.50 kg of item 3, 45 kg of item 5 and 35 or 42 Ltr. of item 6) | 1 No. | Copper Winding Wires/ Strips/ Wire Bars/ Wire Rods/ Cathodes | 20.20 kgs |
| Current Transformers upto & including 36 KV (Outdoor Type)(Containing 23 kg of item 1, 20 kg of item 2, 3.50 kg of item 3, 45 kg of item 5 and 35 or 42 Ltr. of item 6) | 1 No. | Electrical Grade Insulating paper | 3.85 kgs |
| Current Transformers upto & including 36 KV (Outdoor Type)(Containing 23 kg of item 1, 20 kg of item 2, 3.50 kg of item 3, 45 kg of item 5 and 35 or 42 Ltr. of item 6) | 1 No. | Porcelain Insulator | 1 No. |
| Current Transformers upto & including 36 KV (Outdoor Type)(Containing 23 kg of item 1, 20 kg of item 2, 3.50 kg of item 3, 45 kg of item 5 and 35 or 42 Ltr. of item 6) | 1 No. | Mild Steel Sheets/ Coils | 45.45 kgs |
| Current Transformers upto & including 36 KV (Outdoor Type)(Containing 23 kg of item 1, 20 kg of item 2, 3.50 kg of item 3, 45 kg of item 5 and 35 or 42 Ltr. of item 6) | 1 No. | Transformer Oil OR | 36.75 Litres |
| Current Transformers upto & including 36 KV (Outdoor Type)(Containing 23 kg of item 1, 20 kg of item 2, 3.50 kg of item 3, 45 kg of item 5 and 35 or 42 Ltr. of item 6) | 1 No. | Transformer Oil Base Stock | 44.1 Litres |
| Electrical Copper Earthing Rods | 1 kg | Electrolytic Copper Wire Bars / Wire Rods OR Copper Scrap | 1.01 kg/kg content in the export product OR 1.04 kg/kg content in the export product. |
| Electrical Power HT Capacitors (All film design above 660 Volts up to 132 KV) | 1 KVAR | P.P film | 0.0997 kg |
| Electrical Power HT Capacitors (All film design above 660 Volts up to 132 KV) | 1 KVAR | Aluminium Foil | 0.0472 kg |
| Electrical Power HT Capacitors (All film design above 660 Volts up to 132 KV) | 1 KVAR | Non PCB Capacitor Oil | 0.0892 kg |
| Electrical Power HT Capacitors (mixed di- electric design) above 660 volts upto 132 KV | 1 KVAR | P.P. film | 0.1008 kg |
| Electrical Power HT Capacitors (mixed di- electric design) above 660 volts upto 132 KV | 1 KVAR | Aluminium Foil | 0.0651 kg |
| Electrical Power HT Capacitors (mixed di- electric design) above 660 volts upto 132 KV | 1 KVAR | Condensor tissue paper (Electrical Grade) | 0.063 kgs |
| Electrical Power HT Capacitors (mixed di- electric design) above 660 volts upto 132 KV | 1 KVAR | Non PCB Capacitor Oil | 0.126 kg |
| Electrical Power LT Capacitor (Metalised Polypropylene di-electric design) up to 600 Volts. | 1 KVAR | Metalised Polypropylene (MPP Film) | 0.105 kg |
| Electrical Power LT Capacitor (Metalised Polypropylene di-electric design) up to 600 Volts. | 1 KVAR | Non PCB Capacitor Oil | 0.105 kg |
| Electrical Power LT Capacitors (All Polypropylene Film Design) upto 660 Volts | 1 KVAR | P.P. Film | 0.168 kg |
| Electrical Power LT Capacitors (All Polypropylene Film Design) upto 660 Volts | 1 KVAR | Aluminium Foil | 0.189 kg |
| Electrical Power LT Capacitors (All Polypropylene Film Design) upto 660 Volts | 1 KVAR | Non PCB Capacitor Oil | 0.231 kg |
| Electrical Power LT Capacitors (Mixed dielectric design) up to 600 Volts. | 1 KVAR | PP film | 0.300 kgs |
| Electrical Power LT Capacitors (Mixed dielectric design) up to 600 Volts. | 1 KVAR | Aluminium Foil | 0.208 kg |
| Electrical Power LT Capacitors (Mixed dielectric design) up to 600 Volts. | 1 KVAR | Condensor tissue paper (Electrical Grade) | 0.157 kg |
| Electrical Power LT Capacitors (Mixed dielectric design) up to 600 Volts. | 1 KVAR | Non PCB Capacitor Oil | 0.3885 kg |
| Single Phase Electrical Energy Meter | 1 No. | Aluminium/ Aluminium Alloy Ingots/Sheets | 1.05 kg/kg content in export. |
| Single Phase Electrical Energy Meter | 1 No. | Brake Magnet/ Bearing Magnets | Net to net. |
| Single Phase Electrical Energy Meter | 1 No. | Relevant Plastic/Rubber Parts | Net to net. |
| Single Phase Electrical Energy Meter | 1 No. | MS Sheets/Coils/ Strips | 1.05 kg/kg content in export. |
| Single Phase Electrical Energy Meter | 1 No. | CRNGO Sheets/Coils/ Strips | 1.25 kg/kg content in export. |
| Single Phase Electrical Energy Meter | 1 No. | Copper Winding Wire OR Copper Ingots/ Bars/ Rods (Electrolytic Grade) | 1.01 kg/kg content in export 1.02 kg/kg content in the export. |
| Single Phase Electrical Energy Meter | 1 No. | Bearing Assembly | Net to net. |
| Single Phase Electrical Energy Meter | 1 No. | Stainless Steel Rods/ Wire Rods/ Bar/ Rounds | 1.05 kg/kg content in export. |
| Single Phase Electrical Energy Meter | 1 No. | Registered Assembly | 1 No. (Net to net) |
| Single Phase Electrical Energy Meter | 1 No. | Phenolic Resin | 1.05 kg/kg content in the export product |
| Single Phase Electrical Energy Meter | 1 No. | Brass Sheets/ coils/ strips/ scraps | 1.05 kg/kg content in the export product |
| Single Phase shell construction motors with aluminium or cast iron or sheet metal end covers - 0 Watts to 90 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 0 watts to 90 wattsunder SKD condition | 1 No. | Cold Rolled Non-oriented (CRNO) electrical steel sheets/sheets in coil form | 47.80 gms/Watt |
| Single Phase shell construction motors with aluminium or cast iron or sheet metal end covers - 0 Watts to 90 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 0 watts to 90 wattsunder SKD condition | 1 No. | Copper wire bars/cathodes/rods/winding wires/strips | 10.41 gm/Watt |
| Single Phase shell construction motors with aluminium or cast iron or sheet metal end covers - 0 Watts to 90 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 0 watts to 90 wattsunder SKD condition | 1 No. | Electrolytic grade aluminium for rotor | 10.00 gms/Watt |
| Single Phase shell construction motors with aluminium or cast iron or sheet metal end covers - 0 Watts to 90 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 0 watts to 90 wattsunder SKD condition | 1 No. | Commercial grade aluminium in ingot form (upto 99.5% purity) for housing OR | 10.00 gms/Watt |
| Single Phase shell construction motors with aluminium or cast iron or sheet metal end covers - 0 Watts to 90 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 0 watts to 90 wattsunder SKD condition | 1 No. | CRCA Sheets for housing OR | 15.00 gms/Watt |
| Single Phase shell construction motors with aluminium or cast iron or sheet metal end covers - 0 Watts to 90 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 0 watts to 90 wattsunder SKD condition | 1 No. | Mild Steel sheets for housing | 10.99 gms/Watt |
| Single Phase shell construction motors with aluminium or cast iron or sheet metal end covers - 0 Watts to 90 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 0 watts to 90 wattsunder SKD condition | 1 No. | EN-8 Alloy Steel for shaft | 9.65 gms/Watt |
| Single Phase shell construction motors with aluminium or cast iron or sheet metal end covers - 0 Watts to 90 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 0 watts to 90 wattsunder SKD condition | 1 No. | Ball/Sleeve/Roller Bearings | 2 Nos.(Net to net) |
| Single Phase shell construction motors with aluminium or cast iron or sheet metal end covers - 0 Watts to 90 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 0 watts to 90 wattsunder SKD condition | 1 No. | Composite insulation material consisting of paper, nylon, polyester, amide, nomex films | 1.5% of FOB price |
| Single Phase shell construction motors with aluminium or cast iron or sheet metal end covers - 0 Watts to 90 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 0 watts to 90 wattsunder SKD condition | 1 No. | Thermal protectors/thermo strips | Net to net. |
| Single Phase shell construction motors with aluminium or cast iron or sheet metal end covers - 0 Watts to 90 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 0 watts to 90 wattsunder SKD condition | 1 No. | Power Capacitor | 1 No. (Net to net) |
| Single Phase shell construction motors with aluminium or cast iron or sheet metal end covers - 0 Watts to 90 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 0 watts to 90 wattsunder SKD condition | 1 No. | Strain relief bush | 1 No. |
| Single Phase shell construction motors with aluminium or cast iron or sheet metal end covers - 0 Watts to 90 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 0 watts to 90 wattsunder SKD condition | 1 No. | Pull chain switch with chord | 1 No. |
| Single Phase shell construction motors with aluminium or cast iron or sheet metal end covers - 0 Watts to 90 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 0 watts to 90 wattsunder SKD condition | 1 No. | Aluminium alloy | 0.50 kgs |
| Single Phase shell construction motors with aluminium or cast iron or sheet metal end covers - 0 Watts to 90 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 0 watts to 90 wattsunder SKD condition | 1 No. | Lead wire | 1.175 Mtrs |
| Single Phase shell construction motors with aluminium or cast iron or sheet metal end covers - 0 Watts to 90 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 0 watts to 90 wattsunder SKD condition | 1 No. | Power supply chord | 2 Nos. |
| Single Phase shell construction motors with aluminium or cast iron or sheet metal end covers - 0 Watts to 90 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 0 watts to 90 wattsunder SKD condition | 1 No. | CRCA Steel for end shields, mounting base, Lugs & pads | 1.50 kgs. |
| Single Phase shell construction motors with aluminium or cast iron or sheet metal end covers - 0 Watts to 90 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 0 watts to 90 wattsunder SKD condition | 1 No. | Open circuit switch | 1 No. |
| Single Phase shell construction motors with aluminium or cast iron or sheet metal end covers - 0 Watts to 90 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 0 watts to 90 wattsunder SKD condition | 1 No. | Centrifugal gear | 1 No. |
| Single Phase shell construction motors with aluminium or cast iron or sheet metal end covers - 0 Watts to 90 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 0 watts to 90 wattsunder SKD condition | 1 No. | Terminal/ Crimp cap | 3 Nos. or 4 Nos.(as per requirement: quantity to be accounted for in the export product) |
| Single Phase shell construction motors with aluminium or cast iron or sheet metal end covers - 0 Watts to 90 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 0 watts to 90 wattsunder SKD condition | 1 No. | Quick connect/ disconnect terminals/ receptacles and tabs with/ without insulation | 3 or 4 sets (as per requirements quantity to be accounted for in the export product) |
| Single Phase shell construction motors with aluminium or cast iron or sheet metal end covers - 0 Watts to 90 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 0 watts to 90 wattsunder SKD condition | 1 No. | Plastic film for labels/ name plates | 10 grams |
| Single Phase shell construction motors with aluminium or cast iron or sheet metal end covers - 0 Watts to 90 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 0 watts to 90 wattsunder SKD condition | 1 No. | Transfer ribbon for labels/ name plates | 8 sq. inches |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 91 Watts to 180 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 91 watts to 180watt under SKD condition | 1 No. | Cold Rolled Non-oriented (CRNO) electrical steel sheets/sheets in coil form | 46.87 gms/Watt |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 91 Watts to 180 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 91 watts to 180watt under SKD condition | 1 No. | Copper wire bars/cathodes/rods/winding wires/strips | 7.19 gm/Watt |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 91 Watts to 180 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 91 watts to 180watt under SKD condition | 1 No. | Electrolytic grade aluminium for rotor | 5.58 gms/Watt |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 91 Watts to 180 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 91 watts to 180watt under SKD condition | 1 No. | Commercial grade aluminium in ingot form (upto 99.5% purity) for housing OR | 6.00 gms/Watt |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 91 Watts to 180 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 91 watts to 180watt under SKD condition | 1 No. | CRCA Sheets for housing OR | 9.00 gm/Watt |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 91 Watts to 180 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 91 watts to 180watt under SKD condition | 1 No. | Mild Steel sheets for housing | 8.36 gms/Watt |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 91 Watts to 180 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 91 watts to 180watt under SKD condition | 1 No. | EN-8 Alloy Steel for shaft | 5.70 gms/Watt |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 91 Watts to 180 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 91 watts to 180watt under SKD condition | 1 No. | Ball/Sleeve/Roller Bearings | 2 Nos.(Net to net) |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 91 Watts to 180 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 91 watts to 180watt under SKD condition | 1 No. | Composite insulation material consisting of paper, nylon, polyester, amide, nomex films | 1.5% of FOB price |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 91 Watts to 180 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 91 watts to 180watt under SKD condition | 1 No. | Thermal protectors/thermo strips | Net to net. |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 91 Watts to 180 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 91 watts to 180watt under SKD condition | 1 No. | Power Capacitor | 1 No. (Net to net) |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 91 Watts to 180 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 91 watts to 180watt under SKD condition | 1 No. | Strain relief bush | 1 No. |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 91 Watts to 180 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 91 watts to 180watt under SKD condition | 1 No. | Pull chain switch with chord | 1 No. |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 91 Watts to 180 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 91 watts to 180watt under SKD condition | 1 No. | Aluminium alloy | 0.50 kg |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 91 Watts to 180 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 91 watts to 180watt under SKD condition | 1 No. | Lead wire | 1.175 Mtr |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 91 Watts to 180 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 91 watts to 180watt under SKD condition | 1 No. | Power supply chord | 2 Nos. |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 91 Watts to 180 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 91 watts to 180watt under SKD condition | 1 No. | CRCA steel for end shields, mounting base, Lugs & pads | 1.50 kgs |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 91 Watts to 180 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 91 watts to 180watt under SKD condition | 1 No. | Open circuit switch | 1 No. |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 91 Watts to 180 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 91 watts to 180watt under SKD condition | 1 No. | Centrifugal gear | 1 No. |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 91 Watts to 180 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 91 watts to 180watt under SKD condition | 1 No. | Terminal/ Crimp cap | 3 Nos. or 4 Nos. (as per requirement: quantity to be accounted for in the export product) |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 91 Watts to 180 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 91 watts to 180watt under SKD condition | 1 No. | Quick connect/ disconnect terminals/ receptacles and tabs with/ without insulation | 3 or 4 sets (as per requirements quantity to be accounted for in the export product) |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 91 Watts to 180 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 91 watts to 180watt under SKD condition | 1 No. | Plastic film for labels/ name plates | 10 grams |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 91 Watts to 180 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 91 watts to 180watt under SKD condition | 1 No. | Transfer ribbon for labels/ name plates | 8 sq. inches |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 181 Watts to 750 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 181 watts to 750watts under SKD condition | 1 No. | Cold Rolled Non-oriented (CRNO) electrical steel sheets/sheets in coil form | 20.76 gms/Watt |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 181 Watts to 750 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 181 watts to 750watts under SKD condition | 1 No. | Copper wire bars/cathodes/rods/winding wires/strips | 2.76 gm/Watt |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 181 Watts to 750 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 181 watts to 750watts under SKD condition | 1 No. | Electrolytic grade aluminium for rotor | 2.80 gms/Watt |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 181 Watts to 750 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 181 watts to 750watts under SKD condition | 1 No. | Commercial grade aluminium in ingot form (upto 99.5% purity) for housing OR | 2.80 gms/Watt |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 181 Watts to 750 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 181 watts to 750watts under SKD condition | 1 No. | CRCA Sheets for housing OR | 4.20 gms/Watt |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 181 Watts to 750 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 181 watts to 750watts under SKD condition | 1 No. | Mild Steel sheets for housing | 4.88 gms/Watt |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 181 Watts to 750 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 181 watts to 750watts under SKD condition | 1 No. | EN-8 Alloy Steel for shaft | 1.98 gms/Watt |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 181 Watts to 750 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 181 watts to 750watts under SKD condition | 1 No. | Ball/Sleeve/Roller Bearings | 2 Nos.(Net to net) |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 181 Watts to 750 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 181 watts to 750watts under SKD condition | 1 No. | Composite insulation material consisting of paper, nylon, polyester, amide, nomex films | 1.5% of FOB price |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 181 Watts to 750 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 181 watts to 750watts under SKD condition | 1 No. | Thermal protectors/thermo strips | Net to net. |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 181 Watts to 750 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 181 watts to 750watts under SKD condition | 1 No. | Power Capacitor | 1 No. (Net to net) |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 181 Watts to 750 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 181 watts to 750watts under SKD condition | 1 No. | Strain relief bush | 1 No. |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 181 Watts to 750 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 181 watts to 750watts under SKD condition | 1 No. | Pull chain switch with chord | 1 No. |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 181 Watts to 750 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 181 watts to 750watts under SKD condition | 1 No. | Aluminium alloy | 0.50 kg |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 181 Watts to 750 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 181 watts to 750watts under SKD condition | 1 No. | Lead wire | 1.175 Mtrs |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 181 Watts to 750 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 181 watts to 750watts under SKD condition | 1 No. | Power supply chord | 2 Nos |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 181 Watts to 750 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 181 watts to 750watts under SKD condition | 1 No. | CRCA steel for end shields, mounting base, Lugs & pads | 1.50 kgs |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 181 Watts to 750 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 181 watts to 750watts under SKD condition | 1 No. | Open circuit switch | 1 No. |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 181 Watts to 750 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 181 watts to 750watts under SKD condition | 1 No. | Centrifugal gear | 1 No. |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 181 Watts to 750 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 181 watts to 750watts under SKD condition | 1 No. | Terminal/ Crimp cap | 3 Nos. or 4 Nos. (as per requirement quantity to be accounted for in the export product) |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 181 Watts to 750 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 181 watts to 750watts under SKD condition | 1 No. | Quick connect/ disconnect terminals/ receptacles and tabs with/ without insulation | 3 or 4 sets as per requirement quantity to be accounted for in the export product |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 181 Watts to 750 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 181 watts to 750watts under SKD condition | 1 No. | Plastic film for labels/ name plates | 10 grams |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 181 Watts to 750 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 181 watts to 750watts under SKD condition | 1 No. | Transfer ribbon for labels/ name plates | 8 sq. inches |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 751 Watts & above OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 751 watts and aboveunder SKD condition | 1 No. | Cold Rolled Non-oriented (CRNO) electrical steel sheets/sheets in coil form | 19.39 gms/Watt |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 751 Watts & above OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 751 watts and aboveunder SKD condition | 1 No. | Copper wire bars/cathodes/rods/winding wires/strips | 1.89 gm/Watt |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 751 Watts & above OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 751 watts and aboveunder SKD condition | 1 No. | Electrolytic grade aluminium for rotor | 1.63 gms/Watt |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 751 Watts & above OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 751 watts and aboveunder SKD condition | 1 No. | Commercial grade aluminium in ingot form (upto 99.5% purity) for housing OR | 1.63 gms/Watt |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 751 Watts & above OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 751 watts and aboveunder SKD condition | 1 No. | CRCA Sheets for housing OR | 2.44 gms/Watt |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 751 Watts & above OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 751 watts and aboveunder SKD condition | 1 No. | Mild Steel sheets for housing | 2.83 gms/Watt |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 751 Watts & above OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 751 watts and aboveunder SKD condition | 1 No. | EN-8 Alloy Steel for shaft | 1.18 gms/Watt |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 751 Watts & above OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 751 watts and aboveunder SKD condition | 1 No. | Ball/Sleeve/Roller Bearings | 2 Nos.(Net to net) |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 751 Watts & above OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 751 watts and aboveunder SKD condition | 1 No. | Composite insulation material consisting of paper, nylon, polyester, amide, nomex films | 1.5% of FOB price |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 751 Watts & above OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 751 watts and aboveunder SKD condition | 1 No. | Thermal protectors/thermo strips | Net to net. |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 751 Watts & above OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 751 watts and aboveunder SKD condition | 1 No. | Power Capacitor | 1 No. (Net to net) |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 751 Watts & above OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 751 watts and aboveunder SKD condition | 1 No. | Strain relief bush | 1 No. |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 751 Watts & above OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 751 watts and aboveunder SKD condition | 1 No. | Pull chain switch with chord | 1 No. |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 751 Watts & above OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 751 watts and aboveunder SKD condition | 1 No. | Aluminium alloy | 0.50 kg |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 751 Watts & above OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 751 watts and aboveunder SKD condition | 1 No. | Lead wire | 1.175 Mtrs |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 751 Watts & above OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 751 watts and aboveunder SKD condition | 1 No. | Power supply chord | 2 Nos. |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 751 Watts & above OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 751 watts and aboveunder SKD condition | 1 No. | CRCA steel for end shields, mounting base, Lugs & pads | 1.50 kgs |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 751 Watts & above OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 751 watts and aboveunder SKD condition | 1 No. | Open circuit switch | 1 No. |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 751 Watts & above OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 751 watts and aboveunder SKD condition | 1 No. | Centrifugal gear | 1 No. |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 751 Watts & above OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 751 watts and aboveunder SKD condition | 1 No. | Terminal/ Crimp cap | 3 Nos. or 4 Nos. (as per requirement quantity to be accounted for in the export product) |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 751 Watts & above OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 751 watts and aboveunder SKD condition | 1 No. | Quick connect/ disconnect terminals/ receptacles and tabs with/ without insulation | 3 or 4 sets (as per requirements quantity to be accounted for in the export product) |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 751 Watts & above OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 751 watts and aboveunder SKD condition | 1 No. | Plastic film for labels/ name plates | 10 grams |
| Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 751 Watts & above OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 751 watts and aboveunder SKD condition | 1 No. | Transfer ribbon for labels/ name plates | 8 sq. inches |
| Single Phase Transformers above 100000 KVA | 1 No. | CRGO Steel laminations/sheets/coil | 0.57 kgs/KVA |
| Single Phase Transformers above 100000 KVA | 1 No. | Copper winding wires/ strips/ wire bars/ wire rods/ cathodes | 0.09 kg/KVA |
| Single Phase Transformers above 100000 KVA | 1 No. | Transformer Oil OR Transformer Oil Base Stock | 0.21 kgs/KVA OR 0.23Kg/KVA. |
| Single Phase Transformers above 100000 KVA | 1 No. | Phenolic Resin bonded paper | 0.023 kgs/KVA |
| Single Phase Transformers above 100000 KVA | 1 No. | Pre Compressed Press Board | 0.05 kg per KVA |
| Single Phase Transformers above 100000 KVA | 1 No. | Press Board Moulding | 1 Set (Net to net) |
| Single Phase Transformers above 100000 KVA | 1 No. | Motorised Off Load/ on Load Tapchanger | 1 No. (Net to net) |
| Single Phase Transformers above 25000 KVA upto 63000 KVA | 1 No. | CRGO Steel laminations/sheets/coil | 0.79 kgs/KVA |
| Single Phase Transformers above 25000 KVA upto 63000 KVA | 1 No. | Copper winding wires/ strips/ wire bars/ wire rods/ cathodes | 0.16 kg/KVA |
| Single Phase Transformers above 25000 KVA upto 63000 KVA | 1 No. | Transformer Oil OR | 0.58 kgs/KVA |
| Single Phase Transformers above 25000 KVA upto 63000 KVA | 1 No. | Transformer Oil Base Stock | 0.64 kgs/KW |
| Single Phase Transformers above 25000 KVA upto 63000 KVA | 1 No. | Phenolic Resin bonded paper | 0.06 kgs/KVA |
| Single Phase Transformers above 25000 KVA upto 63000 KVA | 1 No. | Pre Compressed Press Board | 0.08 kg per KVA |
| Single Phase Transformers above 25000 KVA upto 63000 KVA | 1 No. | Press Board Moulding | 1 Set per Job |
| Single Phase Transformers above 25000 KVA upto 63000 KVA | 1 No. | Motorised Off Load/ on Load Tapchanger | 1 No. per Job |
| Single Phase Transformers abvoe above 63000 KVA upto 100000 KVA | 1 No. | CRGO Steel laminations/sheets/coil | 0.66 kgs/KVA |
| Single Phase Transformers abvoe above 63000 KVA upto 100000 KVA | 1 No. | Copper winding wires/ strips/ wire bars/ wire rods/ cathodes | 0.15 kg/KVA |
| Single Phase Transformers abvoe above 63000 KVA upto 100000 KVA | 1 No. | Transformer Oil OR | 0.47 kgs/KVA |
| Single Phase Transformers abvoe above 63000 KVA upto 100000 KVA | 1 No. | Transformer Oil Base Stock | 0.52 kgs/KVA |
| Single Phase Transformers abvoe above 63000 KVA upto 100000 KVA | 1 No. | Phenolic Resin bonded paper | 0.042 kgs/KVA |
| Single Phase Transformers abvoe above 63000 KVA upto 100000 KVA | 1 No. | Pre Compressed Press Board | 0.05 kg per KVA |
| Single Phase Transformers abvoe above 63000 KVA upto 100000 KVA | 1 No. | Press Board Moulding | 1 Set (Net to net) |
| Single Phase Transformers abvoe above 63000 KVA upto 100000 KVA | 1 No. | Motorised Off Load/ on Load Tapchanger | 1 No. (Net to net) |
| Single Phase Transformers (Copper Wound)/Active Parts of single phase transformers, upto and including 25 KVA | 1 No. | CRGO Silicon Electrical steel sheets/ Coils OR | 6.60 kgs/KVA |
| Single Phase Transformers (Copper Wound)/Active Parts of single phase transformers, upto and including 25 KVA | 1 No. | Transformer Core Alloy Amorphous Electrical steel | 8.25 kgs/KVA |
| Single Phase Transformers (Copper Wound)/Active Parts of single phase transformers, upto and including 25 KVA | 1 No. | Copper Wire Bars/Rods/Cathodes | 3.264 kgs/KVA |
| Single Phase Transformers (Copper Wound)/Active Parts of single phase transformers, upto and including 25 KVA | 1 No. | Transformer Oil base stock | 5.610 kgs/KVA |
| Single Phase Transformers (Copper Wound)/Active Parts of single phase transformers, upto and including 25 KVA | 1 No. | Electrical Insulation materials-kraft paper | 0.630 kgs/KVA |
| Single Phase Transformers (Copper Wound)/Active Parts of single phase transformers, upto and including 25 KVA | 1 No. | Press Boards | 0.420 kg/KVA |
| Single Phase Transformers (Copper Wound)/Active Parts of single phase transformers, upto and including 25 KVA | 1 No. | Powder Coating Paint | 0.102 kg/KVA |
| Single Phase Transformers (Copper Wound)/Active Parts of single phase transformers, upto and including 25 KVA | 1 No. | CRCA Sheets | 3.960 kgs/KVA |
| Single Phase Transformers (Copper Wound)/Active parts of singel phase transformers, above-100 KVA up to & including 1000 KVA | 1 No. | CRGO Silicon Electrical steel sheets/ Coils OR | 1.540 kgs/KVA |
| Single Phase Transformers (Copper Wound)/Active parts of singel phase transformers, above-100 KVA up to & including 1000 KVA | 1 No. | Transformer Core Alloy Amorphous Electrical Steel | 1.925 kg/KVA |
| Single Phase Transformers (Copper Wound)/Active parts of singel phase transformers, above-100 KVA up to & including 1000 KVA | 1 No. | Copper Wire Bars/Rods/Cathodes | 1.606 kgs/KVA |
| Single Phase Transformers (Copper Wound)/Active parts of singel phase transformers, above-100 KVA up to & including 1000 KVA | 1 No. | Transformer Oil base stock | 1.836 kgs/KVA |
| Single Phase Transformers (Copper Wound)/Active parts of singel phase transformers, above-100 KVA up to & including 1000 KVA | 1 No. | Electrical Insulation materials - kraft paper | 0.105 kg/KVA |
| Single Phase Transformers (Copper Wound)/Active parts of singel phase transformers, above-100 KVA up to & including 1000 KVA | 1 No. | Press Boards | 0.074 kg/KVA |
| Single Phase Transformers (Copper Wound)/Active parts of singel phase transformers, above-100 KVA up to & including 1000 KVA | 1 No. | Powder Coating Paint | 0.011 kg/KVA |
| Single Phase Transformers (Copper Wound)/Active parts of singel phase transformers, above-100 KVA up to & including 1000 KVA | 1 No. | CRCA Sheets | 0.440 kgs/KVA |
| Single Phase Transformers (Copper Wound)/Active parts of singel phase transformers, above-100 KVA up to & including 1000 KVA | 1 No. | Transformer Parts: a)Porcelain Bushings (HV) OR Porcelain Bushings Assembly (H.V) b)Porcelain Bushings (LV) OR Porcelain Bushings Assembly (L.V.) | 2 Nos. 2 Nos. 2 Nos. 2 Nos. |
| Single Phase Transformers (Copper Wound)/Active parts of singel phase transformers, above-100 KVA up to & including 1000 KVA | 1 No. | Magnetic Oil Level Gauge | 1 No. |
| Single Phase Transformers (Copper Wound)/Active parts of singel phase transformers, above-100 KVA up to & including 1000 KVA | 1 No. | Pressure Vaccum Bleeder | 1 No. |
| Single Phase Transformers (Copper Wound)/Active parts of singel phase transformers, above-100 KVA up to & including 1000 KVA | 1 No. | Oil Temperature Indicator | 1 No. |
| Single Phase Transformers (copper Wound)/Active parts of single phase transformers, above 1000 KVS, upto & including 4000 KVA | 1 No. | CRGO Silicon Electrical steel sheets/ Coils OR | 1.155 kgs/KVA |
| Single Phase Transformers (copper Wound)/Active parts of single phase transformers, above 1000 KVS, upto & including 4000 KVA | 1 No. | Transformer Core Alloy Amorphous Electrical steel | 1.445 kg/KVA |
| Single Phase Transformers (copper Wound)/Active parts of single phase transformers, above 1000 KVS, upto & including 4000 KVA | 1 No. | Copper Wire Bars/Rods/Cathodes | 1.445 kgs/KVA |
| Single Phase Transformers (copper Wound)/Active parts of single phase transformers, above 1000 KVS, upto & including 4000 KVA | 1 No. | Transformer Oil base stock | 1.122 kgs/KVA |
| Single Phase Transformers (copper Wound)/Active parts of single phase transformers, above 1000 KVS, upto & including 4000 KVA | 1 No. | Electrical Insulation materials - kraft paper | 0.035 kg/KVA |
| Single Phase Transformers (copper Wound)/Active parts of single phase transformers, above 1000 KVS, upto & including 4000 KVA | 1 No. | Press Boardso | 0.025 kg /KVA |
| Single Phase Transformers (copper Wound)/Active parts of single phase transformers, above 1000 KVS, upto & including 4000 KVA | 1 No. | Powder Coating Paint | 0.005 kg/KVA |
| Single Phase Transformers (copper Wound)/Active parts of single phase transformers, above 1000 KVS, upto & including 4000 KVA | 1 No. | CRCA Sheets | 0.198 kg/ KVA |
| Single Phase Transformers (copper Wound)/Active parts of single phase transformers, above 1000 KVS, upto & including 4000 KVA | 1 No. | Transformer Parts: a)Porcelain Bushings (HV) OR Porcelain Bushings Assembly (H.V.) b)Porcelain Bushings (LV) OR Porcelain Bushings Assemly (L.V) | 2 Nos. 2 Nos. 2 Nos. >2 Nos. 2 Nos. |
| Single Phase Transformers (copper Wound)/Active parts of single phase transformers, above 1000 KVS, upto & including 4000 KVA | 1 No. | Magnetic Oil Guage | 1 No. |
| Single Phase Transformers (copper Wound)/Active parts of single phase transformers, above 1000 KVS, upto & including 4000 KVA | 1 No. | Pressure Vaccum Bleeder | 1 No. |
| Single Phase Transformers (copper Wound)/Active parts of single phase transformers, above 1000 KVS, upto & including 4000 KVA | 1 No. | Oil Temperative Indicator | 1 No. |
| Single Phase Shell construction motors with aluminium or cast iron and covers - 0 Watt to 90 Watts. | 1 No. | Cold Rolled Non-oriented (CRNO) Electrical Steel Sheets in Coil form OR CRCA Steel Sheets in Coil form | 47.80 gms/Watt 47.80 gms/Watt |
| Single Phase Shell construction motors with aluminium or cast iron and covers - 0 Watt to 90 Watts. | 1 No. | Copper Wire Bars/Cathods/Rods/Winding Wires/Strips | 10.41 gms/watt |
| Single Phase Shell construction motors with aluminium or cast iron and covers - 0 Watt to 90 Watts. | 1 No. | Electrolytic grade Aluminium for Rotor | 10.00 gms/watt. |
| Single Phase Shell construction motors with aluminium or cast iron and covers - 0 Watt to 90 Watts. | 1 No. | Commercial grade Aluminium in Ingot form (upto 99.5% purity) for Housing OR CRCA Sheet for Housing OR Mild Steel Sheet for Housing | 10.00 gms/watt OR 15 gms.watt OR 10.99gms/watt. |
| Single Phase Shell construction motors with aluminium or cast iron and covers - 0 Watt to 90 Watts. | 1 No. | EN-8 Alloy Steel for Shaft OR Stainless Steel for Shaft. | 9.65 gms/watt. |
| Single Phase Shell construction motors with aluminium or cast iron and covers - 0 Watt to 90 Watts. | 1 No. | Ball/Sleeve/Roller Bearing | 2 Nos. (Net to Net). |
| Single Phase Shell construction motors with aluminium or cast iron and covers - 0 Watt to 90 Watts. | 1 No. | Composit insulation material consisting of paper, Nylon, Polyester, Amide, Nomex films, Varnish, Tpe, Polyester cord. | upto 1.5% of FOB vlue of export. |
| Single Phase Shell construction motors with aluminium or cast iron and covers - 0 Watt to 90 Watts. | 1 No. | Special packing material like Kraft paper for exportworthy packing lables, names plate, ribbon | Upto 3% of FOB vlue of exports. |
| Single Phase Shell construction motors with aluminium or cast iron and covers - 0 Watt to 90 Watts. | 1 No. | Motor protectors/thermal protectors/thermo strips. | Net to net. |
| Single Phase Shell construction motors with aluminium or cast iron and covers - 0 Watt to 90 Watts. | 1 No. | Power Capacotpr. | 1 No. (Net to net). |
| Single Phase Shell construction motors with aluminium or cast iron and covers - 0 Watt to 90 Watts. | 1 No. | Plastic insulated wire/Cable. | 6 Mtrs. (net to net) |
| Single Phase Shell construction motors with aluminium or cast iron and covers - 0 Watt to 90 Watts. | 1 No. | Terminals, connectors. | 8 Nos. each (Newt to net). |
| Single Phase Shell construction motors with aluminium or cast iron or sheet metal end covers - 91 Watts to 180 Watts | 1 No. | Cold Rolled Non- Oriented (CRNO) Electrical Steel Sheets/ Sheets in Coil form OR CRCA Steel Sheets/ Sheets in Coil form | 46.87 gms/Watt 46.87 gms/Watt |
| Single Phase Shell construction motors with aluminium or cast iron or sheet metal end covers - 91 Watts to 180 Watts | 1 No. | Copper Wire Bars/ Cathods/ Rods/ Winding Wires/ Strips | 7.19 gms/Watt |
| Single Phase Shell construction motors with aluminium or cast iron or sheet metal end covers - 91 Watts to 180 Watts | 1 No. | Electrolytic grade Aluminium for Rotor | 5.58 gms/Watt |
| Single Phase Shell construction motors with aluminium or cast iron or sheet metal end covers - 91 Watts to 180 Watts | 1 No. | Commercial Grade Aluminium in Ingot form (upto 99.5% purity) for Housing OR CRCA Sheets for Housing OR Mild Steel Sheets for Housing | 6.00 gms/Watt 9.00 gms/Watt 8.36 gms/Watt |
| Single Phase Shell construction motors with aluminium or cast iron or sheet metal end covers - 91 Watts to 180 Watts | 1 No. | EN-8 Alloy Steel for Shaft OR Stainless Steel for Shaft | 5.70 gms/Watt |
| Single Phase Shell construction motors with aluminium or cast iron or sheet metal end covers - 91 Watts to 180 Watts | 1 No. | Ball/ Sleeve/ Roller Bearings | 2 Nos. (Net to Net) |
| Single Phase Shell construction motors with aluminium or cast iron or sheet metal end covers - 91 Watts to 180 Watts | 1 No. | Composit insulation material consisting of paper, nylon, polyester, amide, nomex films, varnish, tape polyester cord | Upto 1.5% of FOB value of export |
| Single Phase Shell construction motors with aluminium or cast iron or sheet metal end covers - 91 Watts to 180 Watts | 1 No. | Special packing material like Kraft Paper for exportworthy packing lables, name plate, ribbon | Upto 3% of FOB Value of export |
| Single Phase Shell construction motors with aluminium or cast iron or sheet metal end covers - 91 Watts to 180 Watts | 1 No. | Motor Protectors/ Thermal Protectors/ Thermo Strips | Net to Net |
| Single Phase Shell construction motors with aluminium or cast iron or sheet metal end covers - 91 Watts to 180 Watts | 1 No. | Power Capacitor | 1 No. (Net to Net) |
| Single Phase Shell construction motors with aluminium or cast iron or sheet metal end covers - 91 Watts to 180 Watts | 1 No. | Plastic Insulated Wire/Cable | 6 Mtr. (Net to net) |
| Single Phase Shell construction motors with aluminium or cast iron or sheet metal end covers - 91 Watts to 180 Watts | 1 No. | Terminals, Connectors | 8 Nos. each (Net to Net) |
| Single Phase Shell construction motors with aluminium or cast iron or sheet metal end covers - 181 Watts to 375 Watts | 1 No. | Cold Rolled Non-oriented (CRNO) Electrical Steel Sheets/ Sheets in Coil form OR CRCA Steel Sheets/ Sheets in Coilform | 33.82 gms/Watt 33.82 gms/Watt |
| Single Phase Shell construction motors with aluminium or cast iron or sheet metal end covers - 181 Watts to 375 Watts | 1 No. | Copper Wire Bars/ Cathods/ Rods/ Winding Wires/ Strips | 4.98 gms/Watt |
| Single Phase Shell construction motors with aluminium or cast iron or sheet metal end covers - 181 Watts to 375 Watts | 1 No. | Electrolytic grade aluminium for Rotor | 2.80 gms/Watt |
| Single Phase Shell construction motors with aluminium or cast iron or sheet metal end covers - 181 Watts to 375 Watts | 1 No. | Commercial Grade Aluminium in Ingot form (Upto 99.5% purity) for Housing OR CRCA Sheets for Housing OR Mild Steel Sheets for Housing | 2.80 gms/Watt 4.20 gms/Watt 4.88 gms/Watt |
| Single Phase Shell construction motors with aluminium or cast iron or sheet metal end covers - 181 Watts to 375 Watts | 1 No. | EN-8 Alloy Steel for Shaft OR Stainless Steel for Shaft | 1.98 gms/Watt |
| Single Phase Shell construction motors with aluminium or cast iron or sheet metal end covers - 181 Watts to 375 Watts | 1 No. | Ball/ Sleeve/ Roller Bearings | 2 Nos. (Net to net) |
| Single Phase Shell construction motors with aluminium or cast iron or sheet metal end covers - 181 Watts to 375 Watts | 1 No. | Composit insulation material consisting of paper, nylon, polyester, amide, nomex films, varnish, tape, polyester cord | Upto 1.5% of FOB value of export. |
| Single Phase Shell construction motors with aluminium or cast iron or sheet metal end covers - 181 Watts to 375 Watts | 1 No. | Special packing material like Kraft Paper for exportworthy packing lables, name plate, ribbon | Upto 3% of FOB value of export |
| Single Phase Shell construction motors with aluminium or cast iron or sheet metal end covers - 181 Watts to 375 Watts | 1 No. | Motor Protectors/ Thermal Protectors/ Thermo Strips | Net to Net |
| Single Phase Shell construction motors with aluminium or cast iron or sheet metal end covers - 181 Watts to 375 Watts | 1 No. | Power Capacitor | 1 No. (Net to net) |
| Single Phase Shell construction motors with aluminium or cast iron or sheet metal end covers - 181 Watts to 375 Watts | 1 No. | Plastic Insulated Wire/ Cable | 6 Mtr. (Net to net) |
| Single Phase Shell construction motors with aluminium or cast iron or sheet metal end covers - 181 Watts to 375 Watts | 1 No. | Terminals, Connectors | 8 Nos. each (Net to net) |
| Single Phase Shell construction motors with aluminium or cast iron or sheet metal end covers - 376 Watts to 750 Watts | 1 No. | Cold Rolled Non-oriented (CRNO) Electrical Steel Sheets/ Sheets in Coil form OR CRCA Steel Sheets/ Sheets in Coil form | 20.76 gms/Watt |
| Single Phase Shell construction motors with aluminium or cast iron or sheet metal end covers - 376 Watts to 750 Watts | 1 No. | Copper Wire Bars/ Cathods/ Rods/ Winding Wires/ Strips | 2.76 gms/Watt |
| Single Phase Shell construction motors with aluminium or cast iron or sheet metal end covers - 376 Watts to 750 Watts | 1 No. | Electrolytic grade aluminium for Rotor | 2.80 gms/Watt |
| Single Phase Shell construction motors with aluminium or cast iron or sheet metal end covers - 376 Watts to 750 Watts | 1 No. | Commercial Grade Aluminium in Ingot form (Upto 99.5% purity) for Housing OR CRCA Sheets for Housing OR Mild Steel Sheets for Housing | 2.80 gms/Watt |
| Single Phase Shell construction motors with aluminium or cast iron or sheet metal end covers - 376 Watts to 750 Watts | 1 No. | EN-8 Alloy Steel for Shaft OR Stainless Steel for Shaft | 1.98 gms/Watt |
| Single Phase Shell construction motors with aluminium or cast iron or sheet metal end covers - 376 Watts to 750 Watts | 1 No. | Ball/ Sleeve/ Roller Bearings | 2 Nos. (Net to net) |
| Single Phase Shell construction motors with aluminium or cast iron or sheet metal end covers - 376 Watts to 750 Watts | 1 No. | Composit insulation material consisting of paper, nylon, polyester, amide, nomex films, varnish, tape, polyester cord | Upto 1.5% of FOB value of export. |
| Single Phase Shell construction motors with aluminium or cast iron or sheet metal end covers - 376 Watts to 750 Watts | 1 No. | Special packing material like Kraft Paper for exportworthy packing lables, name plate, ribbon | Upto 3% of FOB value of export. |
| Single Phase Shell construction motors with aluminium or cast iron or sheet metal end covers - 376 Watts to 750 Watts | 1 No. | Motor Protectors/ Thermal Protectors/ Thermo Strips | Net to net |
| Single Phase Shell construction motors with aluminium or cast iron or sheet metal end covers - 376 Watts to 750 Watts | 1 No. | Power Capacitor | 1 No. (Net to net) |
| Single Phase Shell construction motors with aluminium or cast iron or sheet metal end covers - 376 Watts to 750 Watts | 1 No. | Plastic Insulated Wire/Cable | 6 Mtr. (Net to net) |
| Single Phase Shell construction motors with aluminium or cast iron or sheet metal end covers - 376 Watts to 750 Watts | 1 No. | Terminals, Connectors | 8 Nos. each (Net to net) |
| Single Phase Shell construction motors with aluminium or cast iron or sheet metal end covers - 751 Watts and above | 1 No. | Cold Rolled Non-oriented (CRNO) Electrical Steel Sheets/ Sheets in Coil form OR CRCA Steel Sheets/ Sheets in Coil form | 19.39 gms/Watt |
| Single Phase Shell construction motors with aluminium or cast iron or sheet metal end covers - 751 Watts and above | 1 No. | Copper Wire Bars/ Cathods/ Rods/ Winding Wires/ Strips | 1.89 gms/Watt |
| Single Phase Shell construction motors with aluminium or cast iron or sheet metal end covers - 751 Watts and above | 1 No. | Electrolytic grade aluminium for Rotor | 1.63 gms/watt. |
| Single Phase Shell construction motors with aluminium or cast iron or sheet metal end covers - 751 Watts and above | 1 No. | Commercial Grade Aluminium in Ingot form (Upto 99.5% purity) for Housing OR CRCA Sheets for Housing OR>Mild Steel Sheets for Housing | 1.63 gms/Watt 2.44 gms/Watt 2.83 gms/Watt |
| Single Phase Shell construction motors with aluminium or cast iron or sheet metal end covers - 751 Watts and above | 1 No. | EN-8 Alloy Steel for Shaft OR Stainless Steel for Shaft | 1.18 gms/Watt |
| Single Phase Shell construction motors with aluminium or cast iron or sheet metal end covers - 751 Watts and above | 1 No. | Ball/Sleeve/ Roller Bearings | 2 Nos. (Net to net) |
| Single Phase Shell construction motors with aluminium or cast iron or sheet metal end covers - 751 Watts and above | 1 No. | Composit insulation material consisting of paper, nylon, polyester, amide, nomex films, varnish, tape, polyester cord | Upto 1.5% of FOB value of export |
| Single Phase Shell construction motors with aluminium or cast iron or sheet metal end covers - 751 Watts and above | 1 No. | Special packing material like Kraft Paper for exportworthy packing lables, name plate, ribbon | Upto 3% of FOB value of export. |
| Single Phase Shell construction motors with aluminium or cast iron or sheet metal end covers - 751 Watts and above | 1 No. | Motor Protectors/ Thermal Protectors/ Thermo Strips | Net to net |
| Single Phase Shell construction motors with aluminium or cast iron or sheet metal end covers - 751 Watts and above | 1 No. | Power Capacitor | 1 No. (Net to net) |
| Single Phase Shell construction motors with aluminium or cast iron or sheet metal end covers - 751 Watts and above | 1 No. | Plastic Insulated Wire/Cable | 6 Mtr. (Net to net) |
| Single Phase Shell construction motors with aluminium or cast iron or sheet metal end covers - 751 Watts and above | 1 No. | Terminals, Connectors | 8 Nos. each (Net to net) |
| Transformers upto 500 VA | 1 No. | CRGO/ CRNO Lamination E & I Strips OR | 1.10 kgs/kg content in the export product. |
| Transformers upto 500 VA | 1 No. | CRGO/ CRNO Steel Sheet/Coils | 1.07 kgs/kg content in the export product. |
| Transformers upto 500 VA | 1 No. | Relevant Copper Wire (Coated including enamelled / self solderable enamelled or uncoated) | 1.01 kgs/kg content in the export product. |
| Transformers upto 500 VA | 1 No. | Mylar Polyester film of relevant thickness and width | 1.02 Mtrs/ Mtr content in the export product. |
| Transformers upto 500 VA | 1 No. | Electrical Grade Insulating Tape (18 to 45 mm width, with or without adhesive) | 1.02 Mtrs/ Mtr content in the export product. |
| Transformers upto 500 VA | 1 No. | Relevant Nylon 66/ Polybutalene Terrapthe-late/ Polyethylene Terrapthelate/Nylon6/Polyphenylene Sulphide/PET OR Bobbin | 1.02 kgs/kg content in the export product Net to Net |
| Transformers upto 500 VA | 1 No. | Deleted | |
| Transformers upto 500 VA | 1 No. | Relevant PVC or Lead Wire / Cable | 1.01 Mtrs/Mtr content in the export product |
| Transformers upto 500 VA | 1 No. | PVC Sleeve | Net to net |
| Transformers upto 500 VA | 1 No. | Terminal OR | Net to net |
| Transformers upto 500 VA | 1 No. | Insulated Faston Terminals/fully vinyl Insulated Female disconnects 250 Series | Net to net |
| Transformers upto 500 VA | 1 No. | Electrical Insulating Paper/ Nomex paper of relevant GSM | 1.02 Kgs/kg content in the export product |
| Transformers upto 500 VA | 1 No. | Housing | Net to net |
| Transformers upto 500 VA | 1 No. | Varnish/Epoxy Resin/Thinner/Hardener /Lacquers | CIF value limited to 1% of FOB value |
| S.No | Country Name | Shipment Value (Currency) | Total Buyers | |
| No records found | ||||
Get the latest resources, news and more...
By clicking "sign up" you agree to receive emails from The Dollar Business and accept our web terms of use and privacy and cookie policy.
Copyright @2024 The Dollar Business. All rights reserved.
Your Cookie Controls: This site uses cookies to improve user experience, and may offer tailored advertising and enable social media sharing. Wherever needed by applicable law, we will obtain your consent before we place any cookies on your device that are not strictly necessary for the functioning of our website. By clicking "Accept All Cookies", you agree to our use of cookies and acknowledge that you have read this website's updated Terms & Conditions, Disclaimer, Privacy and other policies, and agree to all of them.
Ready to find out more? We're here to help.
Still confused? Learn more here
Ready to find out more? We're here to help.
